Since 2000 · 3,000+ customers

PCB repair lab

PCB Repair Test Equipment in India: Component-Level Board Repair Lab

Star Automations repairs industrial PCBs and PCB assemblies at component level in India, in its own repair lab. ICs are tested on the board with a QMax QT-205 mixed-signal test system, and surface-mount parts are replaced at an SMD rework station under a microscope. The failed part is found and replaced, and the board is returned with a report.

QMax QT-205 mixed-signal functional test system with an inverter control board on the repair bench
Since 2000industrial electronics repair
Component levelthe failed part is found and replaced
IC test on the boardin-circuit and functional test
SMD reworksurface-mount parts replaced under a microscope
Multi-brandindependent, not an OEM service centre

What equipment is used for component-level PCB repair?

A board repair lab needs equipment to test parts on the board, to replace surface-mount parts cleanly and to check the board after repair. The table lists the equipment in the Star Automations repair lab and what each one is used for.

Equipment at Star AutomationsRoleWhat it does in a repair
QMax QT-205 mixed-signal test systemIn-circuit and functional IC testerTests ICs while they are on the board, so the failed IC is identified before any part is removed
SMD rework station with microscopeSurface-mount reworkRemoves and refits surface-mount ICs and small parts without damage to the pads and tracks
Bench impedance meterComponent checkChecks capacitors, inductors and other passive parts against their expected values
Spectrum analyserSignal checkChecks signals on communication and wireless boards
Hipot testersInsulation checkAC and DC withstand checks where the unit needs an insulation check
Bench DC power suppliesControlled power-upPowers the board with current limit so a fault does not cause more damage
QMax QT-205 IC in-circuit and functional tester used for component-level testing
QMax QT-205 IC in-circuit and functional tester in the Star Automations repair lab.

How is a PCB repaired at component level?

The fault is traced to a part before anything is replaced. The usual order is inspection, test on the board, rework, and a power-up and functional check.

  1. Visual inspectionThe board is checked under magnification for burnt parts, cracked joints, corrosion and track damage.
  2. Test on the boardICs are tested in-circuit and passive parts are measured, so the failed parts are identified.
  3. Findings and quotationYou receive the findings and the repair options before any work is approved.
  4. SMD reworkFailed parts are removed and new parts fitted at the rework station.
  5. Power-up and functional checkThe board is powered with current limit and the functions the fault affected are checked.
  6. Report and dispatchA printed report with findings and parts replaced goes back with the board.
SMD rework station with microscope arm and a circuit board on the holder
SMD rework station with microscope arm, used to remove and refit surface-mount parts.

Which boards can be repaired?

We repair control, power and interface boards from industrial equipment of many makes. Send the board photo and part number and we confirm repairability before you ship.

Board typeTypical faultsRelated page
Servo drive and VFD boardsNo power, gate driver fault, overcurrent trip, burnt power stageServo drive repair, VFD repair
CNC, PLC and HMI boardsNo boot, I/O fault, display fault, communication faultCNC controller repair, PLC repair
SMPS and power supply boardsDead output, low output, failed capacitorsSMPS repair
Solar inverter and UPS boardsControl board fault, driver fault, sensing faultSolar inverter repair, UPS repair
EV charger and BMS boardsNo charge, protection trip, communication faultEV charger repair, BMS repair
Obsolete boardsBoard no longer available from the makerIndustrial PCB repair
Bench impedance meter used for component checks
Bench impedance meter used for component checks.

Looking for an electronics repair partner in India?

OEMs, machine builders, service companies and overseas companies use Star Automations as their repair partner in India. Boards and units are sent to our lab, repaired at component level and returned with a report. We can work under an NDA.

Who you areWhat you sendWhat we do
Plant maintenance teamFailed board with make, part number and faultFindings first, then repair, functional check and report
OEM or machine builderField-return boards in batchesRepair-return on an agreed process, with a report per board
Service company or system integratorBoards from your customers' equipmentBack-end component-level repair for your service work
Overseas companyUnits shipped to India for repairImport for repair, repair, check and re-export

Frequently asked questions

What equipment does Star Automations use for PCB repair?

Star Automations uses a QMax QT-205 mixed-signal test system for in-circuit and functional testing of ICs, an SMD rework station with a microscope for removing and refitting surface-mount parts, a spectrum analyser, a bench impedance meter, hipot testers and bench power supplies. The equipment is in our own workshops in India.

What does component-level PCB repair mean?

Component-level repair means the failed part on the board is found and replaced, such as an IC, gate driver, capacitor, optocoupler or power device. The board is not swapped for a new one. This keeps the original board in service and is often the only route when the board is obsolete.

Can you find a fault on a board without the circuit diagram?

In most cases yes. ICs are tested on the board with the QMax QT-205, passive parts are checked with the impedance meter, and the fault is traced from the readings. Send the board photo, part number and fault and we confirm repairability before you ship.

Can you replace fine-pitch SMD and surface-mount ICs?

Yes. Surface-mount ICs and small passive parts are removed and refitted at the SMD rework station under a microscope. Send the board details so we can confirm the package type before you ship.

Which boards do you repair?

We repair industrial control boards, including servo drive and VFD control and power boards, CNC, PLC and HMI boards, servo amplifier boards, SMPS and power supply boards, solar inverter boards, EV charger boards and BMS boards, from many makes.

Do you work as a repair partner for OEMs and service companies?

Yes. OEMs, machine builders, service companies and overseas companies send boards and units to us for repair and return. We can work under an NDA and handle import for repair and re-export.

Do I get a test report?

Yes. The repaired board is returned with a printed report listing the findings, the parts replaced and the checks done after repair.

How do I get a quotation?

Send the board make, part number, a clear photo of both sides and the fault on WhatsApp +91 97866 22233 or the quote form. We confirm repairability and reply with a quotation. Warranty is set per customer on the quote. We do not publish fixed prices.

Related repair services

Call or WhatsApp +91 97866 22233, or email info@starautomations.com. Star Automations is an independent multi-brand repair company and is not an OEM service centre.