Test stations and jigs
Functional, ICT and Test Jig Systems for PCBs and Electronics
Functional and in-circuit tests check that a board or product works before it ships. Star Automations designs and builds test stations and jigs for electronics and motor products, running electrical checks such as insulation, hipot, communication and feedback tests, with results logged for traceability. The plant sets its own pass limits and validates the station.
What a station can check
| Check | What it tells you | Applies to |
|---|---|---|
| Insulation | Isolation between circuits and frame | Power boards, motors, drives |
| Hipot | Dielectric withstand of the insulation system | Power products, motors, drives |
| Winding resistance | Phase balance and winding faults | Motors |
| Back-EMF | Magnet and winding correctness | PM and BLDC motors |
| No-load current and speed | Basic running behavior | Motors, drives |
| Hall and encoder feedback | Feedback signals are present and correct | Motors, drives, encoders |
| Communication | Bus or serial link works | Boards, drives, encoders |
Functional test and in-circuit test coverage is scoped per board after a design study.
How a station is built
- Design studyWe review the product, the test list and the pass limits you set.
- Fixture and softwareThe jig, wiring and test software are built to the product.
- Bench test and tuneThe station is tuned on sample products on the bench.
- HandoverYour team validates the station against its own acceptance criteria.
Test station layout
Frequently asked questions
What is functional testing for PCBs?
A powered test that checks a board or product does its job, such as outputs, communication and feedback, before shipping.
What is ICT testing?
In-circuit testing checks components and connections on a board. Star scopes the coverage you need after a design study.
Do you build test jigs?
Yes. Star has built test stations and jigs for motor and drive products. Share the product and the test list.
Can results go to our MES?
Yes. Results can be logged and sent to the plant's MES. See MES traceability integration.
Can you repair our existing test equipment?
Star repairs electronics and test equipment at component level. See PCB repair and test equipment.
Who validates the station?
The plant. Star hands over the station with its test list, and your team validates it against your acceptance criteria.