OEM Repair Alternatives in India 2026

Star Automations is an independent multi-brand repair company in India, with workshops in Puducherry, Chennai and Bengaluru. We repair industrial servo motors, drives and electronics at component level, not by swapping whole units. Compare OEM service centres, independent single-brand shops and replacement with a new unit on turnaround, test equipment and fit for your job. We confirm repairability before you ship.

Get a free repairability check on WhatsApp Email us

Key takeaways

  • Star Automations is not an OEM service centre. We are an independent repair company that works across many brands.
  • We confirm repairability and state the findings before any repair is approved, so you know the options first.
  • Servo motor repair is offered as emergency same day, urgent in 3 days or standard in 7 days, confirmed on the quote.
  • Repaired servo motors are checked on a Mitchell TI-5000JX or TI-3000JX universal servo test bench.

How the options compare

Star Automations is our own company. We have listed it first, but we compared all options on turnaround, test equipment and fit for the job, so you can make the best choice.

Option Turnaround Test equipment Best for
Star Automations Servo repair: same day (emergency), 3 days (urgent), 7 days (standard) Mitchell TI-5000JX and TI-3000JX universal servo test benches; Unidrive M701 bench for Control Techniques drives Multi-brand servo motors, drives and boards, repaired at component level. Warranty set per customer on the quote.
OEM authorised service centre Varies; ask the OEM for a written timeline The OEM’s own test setup for its products Customers whose warranty or service agreement requires the OEM route.
Independent single-brand repair shop Varies by shop Varies by shop Local, single-brand work where the shop has the right experience with that make.
Replace with a new unit Lead time of the new unit Factory-tested by the manufacturer Units where repair is not feasible, or where the cost of a new unit is the simpler choice.

1. Star Automations

We have been repairing industrial electronics since 2000, with the servo motor as our core work. Units from many brands are inspected, quoted and repaired at component level, with the failed part identified before any work is approved. Repaired servo motors are checked on our Mitchell TI-5000JX and TI-3000JX test benches, with encoder alignment where needed.

Our workshops are in Puducherry, Chennai and Bengaluru. Units can be sent by courier or picked up.

2. OEM authorised service centre

An OEM service centre repairs or replaces units for its own brand, using the manufacturer’s process. It is the right route when the warranty or service agreement requires it. Turnaround varies, so ask for a written timeline before you send the unit.

3. Independent single-brand repair shop

A single-brand shop can be a good fit for a local, routine job on one make. Check that it has the test equipment for your drive or motor type, and ask what checks are done before and after the repair. Compare the findings it gives you with what a multi-brand workshop would report.

4. Replace with a new unit

Buying a new unit avoids downtime for repair, and it can be the simpler choice when the unit is old or the fault is severe. The trade-off is the new unit’s cost and lead time. Repair is often worth comparing first, especially for servo motors and drives with a healthy mechanical part.

How easy is it to switch from an OEM repair route?

Switching takes four steps. You send the model and fault, we confirm repairability, you approve the findings, and the tested unit comes back with a report.

  1. Send the model and fault. Make, model, the fault and a photo of the nameplate, on WhatsApp or the request form.
  2. Get the findings. We confirm repairability and state the failed part and repair options before any work is approved.
  3. Ship the unit. Send it disconnected from the mains and the machine. Pickup can be arranged.
  4. Repair, test and return. After your approval we repair, run a functional check and send back the unit with a printed report.

Start with a free repairability check

Frequently asked questions

Is Star Automations an OEM service centre?

No. Star Automations is an independent multi-brand repair company. We repair industrial servo motors, drives and electronics at component level, and we confirm repairability before you ship. Warranty is set per customer on the quote.

Can you repair a unit when the OEM will not?

Send the make, model and fault, and we check whether the unit is repairable before you ship anything. Where a part is no longer available, the options are stated in the findings before any work is approved.

How is a repaired servo motor tested?

Repaired servo motors are tested on a universal servo test bench, the Mitchell TI-5000JX or TI-3000JX, with encoder alignment and a functional check. A printed report with the findings, parts replaced and test readings goes back with the unit.

How fast can a servo motor repair be done?

Servo motor repair is offered as emergency same day, urgent in 3 days or standard in 7 days. The timeline for your unit is confirmed on the quote.

Do you repair brands other than one manufacturer?

Yes. We repair servo motors and drives from Allen-Bradley, Panasonic, Delta, Omron, Bosch Rexroth, Kollmorgen, Parker and other makes. Send the model number and we will confirm.

Can I send a unit from outside India?

Yes. Customers outside India can courier units to us. We check repairability first, repair, test and ship back, with export documentation handled.

Ready to compare for your unit?

Send us the make, model and fault. We will tell you whether the unit can be repaired before you ship it.

WhatsApp +91 97866 22233 Email info@starautomations.com