Since 2000 · 3,000+ customers

Siemens · Servo drive repair · India

Siemens servo drive repair in India

We repair Siemens servo drives and motor modules at component level: power stage, DC link, feedback input, control and I/O faults. Every repaired drive is tested with a servo motor under load before dispatch and returned with a printed test report. Send the drive label and the fault number, such as F30001, to get a quote. Repair warranty is 3 months to 1 year, stated on each quotation.

Siemens SINAMICS V90 6SL3210-5FB10-8UA0 servo drive
  • 25+years of servo repair, since 2000
  • 3,000+customers across India
  • 100+servo brands covered by our universal servo motor test equipment
  • 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
  • Same dayemergency repair option*

*Where the fault and parts allow. Every repaired unit returns with a printed test report.

Repair turnaround you can plan around

Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.

Emergency: same day

For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.

Urgent: 3 working days

Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.

Standard: 7 working days

Full repair, encoder alignment, run test under load and a printed test report.

  • Free repairability check from a nameplate photo
  • Printed test report with every motor
  • Written warranty, terms stated on every quotation
  • Pickup can be arranged; parts that must be imported are quoted with their own timeline
01Models

Siemens servo drives and amplifiers we repair

Send the full order number (6SL3...) from the label. If your model is not listed, ask us on WhatsApp.

  • SINAMICS S120 motor modules and power modules (booksize and chassis)
  • SINAMICS S110 related units
  • SINAMICS V90 servo drives
  • SIMODRIVE 611 and 611D drives
  • SIMOVERT MASTERDRIVES
  • Matching motors: 1FK7, 1FK6, 1FK2, 1FT7, 1FT6, 1FT5 and 1FL6
Siemens SINAMICS V90 6SL3210-5FB10-8UA0 servo drive, front view
6SL3210-5FB10-8UA0, front view
Siemens SINAMICS V90 6SL3210-5FB10-8UA0 servo drive, heatsink side
Heatsink side
Siemens SINAMICS V90 6SL3210-5FB10-8UA0 servo drive, side view
Side view
Siemens SINAMICS S120 drive units
Siemens SINAMICS S120 drive units
02Failure modes

Common Siemens drive faults

A drive alarm tells you where to look, not always what failed. Overcurrent can be the power stage, the gate drive, the motor or the cable.

  • No power, or a failed power stage
  • DC link and precharge faults
  • Overcurrent and ground-fault trips
  • Encoder and DRIVE-CLiQ feedback faults
  • Control board and power supply faults
  • Cooling fan and overtemperature faults
03Alarm codes

Siemens alarm codes and what to check

The faults below are common SINAMICS S120 power unit faults. Numbers differ on other Siemens series.

F30001: power unit overcurrent

Can be the power stage, the motor or the cable. Disconnect the motor and see if the fault stays.

F30002 and F30003: DC link voltage

Overvoltage often means braking or supply problems; undervoltage points to supply or precharge faults.

F30004: heatsink overtemperature

Check the fan, the airflow and the enclosure temperature.

F30005 and F30021: overload and ground fault

Check load, motor cable and motor insulation.

Alarm guides: Servo encoder alarms · Test a servo motor without the drive · Repair or replace?

04Verification

How a repaired Siemens drive is tested

After component-level repair, the drive is powered up on a test rig, the power stage and feedback circuits are checked, and the drive is run with a servo motor under load. Your drive comes back with its own settings and serial history, and a printed test report.

If the motor is the real cause, the drive repair alone will not hold. When the alarm points to feedback or overcurrent, send the motor too: see Siemens servo motor repair and encoder repair. We are an independent multi-brand repair company, not an OEM service centre.

05Turnaround

Siemens servo drive repair turnaround

Emergency: same day

For a stopped line. Send the label photo and alarm code first.

Urgent: 3 days

Once the fault is confirmed on inspection.

Standard: 7 days

Planned repair with the full test and a printed report.

Time depends on the fault and on parts. What affects repair cost.

06How to send

How to send the drive

You can send a drive from anywhere in India. Talk to us before you courier, so the unit is expected and logged on arrival.

  1. Send the nameplate

    WhatsApp a clear photo of the drive label, the alarm or fault code and what the machine was doing when it failed.

  2. We confirm repairability

    We tell you whether we can test and repair that model before anything is shipped.

  3. Courier or pickup

    Courier the drive, with the motor if the alarm points to feedback or overcurrent, to our Chennai or Puducherry bench.

  4. Inspection and quote

    The drive is opened and inspected. You get the findings and a quote before work starts.

  5. Repair, test, dispatch

    Repaired at component level, tested with a servo motor under load, then dispatched with a printed test report.

Discontinued SIMODRIVE 611 and SINAMICS S120 modules: repair, refurbishment and migration

Star Automations is an independent multi-brand repair company, not an OEM service centre. We repair and refurbish discontinued Siemens drive modules such as the SIMODRIVE 611 power module 6SN1123-1AA00-0DA1 (1-axis, 80 A, for 1FT5/1FT6 motors) and the SINAMICS S120 single motor module 6SL3120-1TE21-8AA3 (18 A booksize). Faulty units are bench-tested, repaired at the component level and load-checked; where repair is not sensible we plan a migration to a current SINAMICS S120 platform with motor, encoder and parameter checks.

  • 6SN1123-1AA00-0DA1 SIMODRIVE 611 1-axis power module: DC-link, IGBT and gate-drive repair, cooling and fan check.
  • 6SL3120-1TE21-8AA3 SINAMICS S120 single motor module: power stage and DRIVE-CLiQ board repair, parameter and firmware matching.
  • Migration path SIMODRIVE 611 to SINAMICS S120 with motor and encoder compatibility study and commissioning support.
Can you repair a Siemens 6SN1123-1AA00-0DA1 SIMODRIVE 611 power module?

Yes. Send the nameplate photo and fault on WhatsApp. We bench-test the module, repair the failed power or control section and load-check it before return, and we advise on migration if the unit is beyond economic repair.

Can a discontinued SINAMICS S120 6SL3120-1TE21-8AA3 module be repaired?

Yes, in most cases. Typical faults are power-stage, DC-link and control board failures. We confirm firmware and parameter compatibility so the module works with your existing Control Unit.

Are you a Siemens authorised service centre?

No. We are an independent multi-brand repair company and not an OEM service centre.

S120 double motor module, 611 E/R infeed and SIMOVERT MASTERDRIVES: repair

Star Automations is an independent multi-brand repair company, not an OEM service centre. We repair the SINAMICS S120 double motor module 6SL3120-2TE21-8AA3 (18 A/18 A), the SIMODRIVE 611 E/R infeed module 6SN1145-1BA01-0BA1 (16/21 kW) and SIMOVERT MASTERDRIVES VC 6SE7021-0EA61, with bench tests and load checks.

  • 6SL3120-2TE21-8AA3 S120 double motor module: power-stage and DRIVE-CLiQ repair.
  • 6SN1145-1BA01-0BA1 611 E/R infeed: DC-bus and rectifier section repair.
  • 6SE7021-0EA61 MASTERDRIVES VC converter: IGBT, DC-link and control repair.
Can an S120 double motor module 6SL3120-2TE21-8AA3 be repaired?

Yes, in most cases. We repair the failed power section and verify it before return.

Do you repair SIMODRIVE 611 infeed modules?

Yes. Send the nameplate and fault on WhatsApp.

SIMOVERT MASTERDRIVES VC 6SE7021-3EB61 and 6SE7027-2ED61: repair and upgrade

Star Automations is an independent multi-brand repair company, not an OEM service centre. We repair discontinued Siemens SIMOVERT MASTERDRIVES VC converters such as the 5.5 kW 6SE7021-3EB61 and the 37 kW 6SE7027-2ED61 used on steel, paper, crane and extruder drives, and plan an upgrade to SINAMICS with parameter mapping when repair is not sensible.

  • 6SE7021-3EB61 MASTERDRIVES VC 5.5 kW / 13.2 A: IGBT, DC-link, gate-drive and control repair.
  • 6SE7027-2ED61 MASTERDRIVES VC 37 kW / 72 A: power-stage repair for rolling-mill and extruder duty.
  • Upgrade path MASTERDRIVES to SINAMICS with motor, encoder and parameter review.
Can a Siemens 6SE7021-3EB61 MASTERDRIVES VC be repaired?

Yes, in most cases. Send the nameplate and fault code on WhatsApp. We bench-test, repair the failed section and load-check the unit.

Can MASTERDRIVES 6SE7027-2ED61 be upgraded to SINAMICS?

Yes. We review motor, encoder and parameters and plan the changeover with commissioning support.

SIMODRIVE 611 (6SN1123, 6SN1145, 6SN1118) and SINAMICS S120 (6SL3120, 6SL3130) repair

Star Automations is an independent multi-brand repair company, not an OEM service centre. We repair Siemens SIMODRIVE 611 power modules (6SN1123), E/R infeed modules (6SN1145), closed-loop control modules (6SN1118), SIMOVERT MASTERDRIVES VC (6SE7021, 6SE7027) and SINAMICS S120 motor modules (6SL3120) and line modules (6SL3130). Send the full order number from the label for a repair quote or a migration plan.

  • 6SN1123 series SIMODRIVE 611 1-axis and 2-axis power modules, for example 6SN1123-1AA00-0BA1, 6SN1123-1AA00-0DA1 and 6SN1123-1AB00-0BA1.
  • 6SN1145 series SIMODRIVE 611 E/R infeed modules, for example 6SN1145-1BA01-0BA1, 6SN1145-1BA01-0DA1 and 6SN1145-1BB00-0FA1.
  • 6SN1118 series SIMODRIVE 611 digital closed-loop control modules, for example 6SN1118-1NH01-0AA1.
  • 6SE7021 and 6SE7027 MASTERDRIVES VC converters, for example 6SE7021-8TB61, 6SE7021-0TP50-Z and 6SE7027-2ED61.
  • 6SL3120 series S120 single and double motor modules, for example 6SL3120-1TE21-8AA3, 6SL3120-2TE21-8AA3 and 6SL3120-1TE28-5AA3.
  • 6SL3130 series S120 line modules, for example 6SL3130-7TE23-6AA3 and 6SL3130-6TE21-6AA4.
What does it cost to repair a SIMODRIVE 611 6SN1123 power module?

The repair cost depends on the exact order number and the fault found on the bench. Send the order number and a photo of the label on WhatsApp and we reply with a repair quote.

Where can I find the manual for a 6SN1145 infeed module?

Use the manufacturer manual for the exact order number. If the unit is faulty, send us the label and the fault description and we will advise whether repair, upgrade or migration is the better route.

Can a 6SL3130 line module be repaired?

Yes, in most cases. Send the full order number and the fault or alarm shown on the Control Unit.

→How it works

From nameplate photo to a tested motor in 7 steps

One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.

  1. 1 · Nameplate photoSend it on WhatsApp or the form
  2. 2 · Repairable? QuoteUsually the same working day
  3. 3 · Courier or pickupThe unit reaches our bench
  4. 4 · Bench diagnosisInsulation, windings, brake, encoder
  5. 5 · RepairFailed parts, bearings, seals, brake
  6. 6 · Align and run-testEncoder aligned; no-load and load run
  7. 7 · Report and dispatchPrinted test report with the unit
  8. Line down?Servo Swap ships a tested unit first. How Servo Swap works

EmergencySame day*

Urgent3 working days

Standard7 working days

*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.

Siemens servo drive repair questions

More on the FAQ page.

Do you repair Siemens servo drives in India?

Yes. We repair Siemens servo drives and amplifiers at component level, test them with a servo motor under load and return them with a printed test report. Send the label photo and alarm code on WhatsApp and we confirm repairability before you courier.

Are you an Siemens service centre?

No. Star Automations is an independent multi-brand repair company, not an OEM service centre. The brand name only describes the equipment we repair.

Can you repair the motor and the drive together?

Yes. When the alarm points to feedback or overcurrent we test the drive with the motor, so a motor fault does not bring the alarm back.

What do I send for a quote?

The drive label photo, the alarm code, the motor nameplate and what the machine was doing at the time of failure.

Send the drive label and alarm code. We confirm repairability before you courier.

WhatsApp a photo to +91 97866 22233, or email info@starautomations.com.