Since 2000 · 3,000+ customers

Siemens SINAMICS S120 Single Motor Module 85 A

Siemens 6SL3120-1TE28-5AA3 Repair, Upgrade & Migration India

Send us the Siemens 6SL3120-1TE28-5AA3 (SINAMICS S120 Single Motor Module 85 A) for bench diagnosis and repair. We are an independent multi-brand repair company, not an OEM service centre. If the unit is obsolete we also plan the upgrade or migration path. Send the label photo and the fault on WhatsApp for a repair quote.

  • 25+years of servo repair, since 2000
  • 3,000+customers across India
  • 100+servo brands covered by our universal servo motor test equipment
  • 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
  • Same dayemergency repair option*

*Where the fault and parts allow. Every repaired unit returns with a printed test report.

Repair turnaround you can plan around

Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.

Emergency: same day

For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.

Urgent: 3 working days

Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.

Standard: 7 working days

Full repair, encoder alignment, run test under load and a printed test report.

  • Free repairability check from a nameplate photo
  • Printed test report with every motor
  • Written warranty, terms stated on every quotation
  • Pickup can be arranged; parts that must be imported are quoted with their own timeline

Siemens 6SL3120-1TE28-5AA3 repair scope

  • Siemens 6SL3120-1TE28-5AA3 Typical faults we see: F30001 overcurrent, F30021 ground fault or lost DRIVE-CLiQ communication.
  • What to send A photo of the label, the fault or alarm you see, and the machine it runs on.
  • Repair first Component-level fault finding on the bench, then a test before the unit is returned.
  • Upgrade or migrate If the part is obsolete, we map it to a supported replacement and help with conversion and commissioning.

How repair, upgrade and migration work

  • 1. Send the details. Nameplate photo, fault description and, for PLCs, the project backup if available.
  • 2. Bench check. Power-up, fault isolation and component-level diagnosis at our Puducherry and Chennai labs.
  • 3. Repair or plan the move. Repair and test, or an upgrade and migration plan with program conversion, parameter mapping and commissioning support.
  • 4. Verified return. The unit is tested before dispatch and returned with a test report.
→How it works

From nameplate photo to a tested motor in 7 steps

One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.

  1. 1 · Nameplate photoSend it on WhatsApp or the form
  2. 2 · Repairable? QuoteUsually the same working day
  3. 3 · Courier or pickupThe unit reaches our bench
  4. 4 · Bench diagnosisInsulation, windings, brake, encoder
  5. 5 · RepairFailed parts, bearings, seals, brake
  6. 6 · Align and run-testEncoder aligned; no-load and load run
  7. 7 · Report and dispatchPrinted test report with the unit
  8. Line down?Servo Swap ships a tested unit first. How Servo Swap works

EmergencySame day*

Urgent3 working days

Standard7 working days

*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.

Frequently asked questions

Can you repair the Siemens 6SL3120-1TE28-5AA3?

Yes. Send the unit or a photo of the label and the fault on WhatsApp. We inspect it on the bench and reply with the repair plan.

What does it cost to repair the Siemens 6SL3120-1TE28-5AA3?

Repair cost depends on the exact order number and the fault found on the bench. Send the order number and a photo of the label on WhatsApp and we reply with a repair quote.

Where can I find the manual for the Siemens 6SL3120-1TE28-5AA3?

Use the manufacturer manual for the exact order number. If the unit is faulty, send us the label and fault and we will advise the repair or migration route.

Are you an authorised Siemens service centre?

No. Star Automations is an independent multi-brand repair company, not an OEM service centre.