Emergency: same day
For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.
Fanuc · Servo drive repair · India
Fanuc servo drive repair in India
We repair Fanuc servo amplifiers and drives at component level: power stage, DC link, feedback input, control and I/O faults. Every repaired amplifier is tested with a servo motor under load before dispatch and returned with a printed test report. Send the amplifier label and the alarm number, such as SV0368, to get a quote.
- 25+years of servo repair, since 2000
- 3,000+customers across India
- 100+servo brands covered by our universal servo motor test equipment
- 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
- Same dayemergency repair option*
*Where the fault and parts allow. Every repaired unit returns with a printed test report.
Repair turnaround you can plan around
Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.
Urgent: 3 working days
Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.
Standard: 7 working days
Full repair, encoder alignment, run test under load and a printed test report.
- Free repairability check from a nameplate photo
- Printed test report with every motor
- Written warranty, terms stated on every quotation
- Pickup can be arranged; parts that must be imported are quoted with their own timeline
01Models
Fanuc servo drives and amplifiers we repair
Send the full A06B part number from the label. If your model is not listed, ask us on WhatsApp.
- alpha i servo amplifiers (SVM single, two and three axis)
- beta i servo amplifiers (beta iSV and beta iSVM)
- alpha i power supply modules (PSM) and spindle amplifier modules (SPM)
- Earlier alpha series servo amplifiers
- Matching motors: alpha i, beta i and earlier alpha servo motors with their pulsecoders
02Failure modes
Common Fanuc drive faults
A drive alarm tells you where to look, not always what failed. A feedback alarm can be the amplifier, the pulsecoder, the cable or the motor.
- No power, or a failed power stage
- DC link, low-voltage and regeneration faults
- Overcurrent and amplifier alarms
- Pulsecoder and serial feedback alarms such as SV0368
- Switch-mode power supply and gate drive failures
- FSSB link and display faults
03Alarm codes
Fanuc alarm codes and what to check
Alarm text and numbers vary between CNC models. Always confirm in the manual for your control.
SV0368: serial data error
Serial feedback communication. Check the cable and pulsecoder, then the amplifier input.
SV0364 and SV0366: pulsecoder phase
Pulsecoder or cable fault. Test the motor and its pulsecoder.
SV0414: servo alarm
Read the detail bits to find the cause, then check the amplifier and motor.
SV0360: pulsecoder checksum
Pulsecoder data error. A motor with a failed pulsecoder needs inspection.
Alarm guides: Fanuc SV0368 and SV0366 · Servo encoder alarms · Test a servo motor without the drive · Fanuc SV0364 · Fanuc SV0414
04Verification
How a repaired Fanuc drive is tested
After component-level repair, the drive is powered up on a test rig, the power stage and feedback circuits are checked, and the drive is run with a servo motor under load. Your drive comes back with its own settings and serial history, and a printed test report.
If the motor is the real cause, the drive repair alone will not hold. When the alarm points to feedback or overcurrent, send the motor too: see Fanuc servo motor repair and Fanuc pulsecoder repair. We are an independent multi-brand repair company, not an OEM service centre.
05Turnaround
Fanuc servo drive repair turnaround
Emergency: same day
For a stopped line. Send the label photo and alarm code first.
Urgent: 3 days
Once the fault is confirmed on inspection.
Standard: 7 days
Planned repair with the full test and a printed report.
Time depends on the fault and on parts. What affects repair cost.
06How to send
How to send the drive
You can send a drive from anywhere in India. Talk to us before you courier, so the unit is expected and logged on arrival.
Send the nameplate
WhatsApp a clear photo of the drive label, the alarm code and what the machine was doing when it failed.
We confirm repairability
We tell you whether we can test and repair that model before anything is shipped.
Courier or pickup
Courier the drive, with the motor if the alarm points to feedback or overcurrent, to our Chennai or Puducherry bench.
Inspection and quote
The drive is opened and inspected. You get the findings and a quote before work starts.
Repair, test, dispatch
Repaired at component level, tested with a servo motor under load, then dispatched with a printed test report.
→How it works
From nameplate photo to a tested motor in 7 steps
One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.
- 1 · Nameplate photoSend it on WhatsApp or the form
- 2 · Repairable? QuoteUsually the same working day
- 3 · Courier or pickupThe unit reaches our bench
- 4 · Bench diagnosisInsulation, windings, brake, encoder
- 5 · RepairFailed parts, bearings, seals, brake
- 6 · Align and run-testEncoder aligned; no-load and load run
- 7 · Report and dispatchPrinted test report with the unit
- Line down?Servo Swap ships a tested unit first. How Servo Swap works
EmergencySame day*
Urgent3 working days
Standard7 working days
*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.
Fanuc servo drive repair questions
More on the FAQ page.
Do you repair Fanuc servo drives in India?
Yes. We repair Fanuc servo drives and amplifiers at component level, test them with a servo motor under load and return them with a printed test report. Send the label photo and alarm code on WhatsApp and we confirm repairability before you courier.
Are you an Fanuc service centre?
No. Star Automations is an independent multi-brand repair company, not an OEM service centre. The brand name only describes the equipment we repair.
What does Fanuc alarm SV0368 mean?
It is a serial data error between the pulsecoder and the amplifier. The cause can be the pulsecoder, the cable or the amplifier input. See our SV0368 guide.
Can you repair the motor and the amplifier together?
Yes. When the alarm points to feedback or overcurrent we test the amplifier with the motor, so a motor fault does not bring the alarm back.
What do I send for a quote?
The amplifier label photo with the A06B number, the alarm number, the motor nameplate and what the machine was doing at the time of failure.
Send the drive label and alarm code. We confirm repairability before you courier.
WhatsApp a photo to +91 97866 22233, or email info@starautomations.com.