Since 2000 · 3,000+ customers

Partner with Us Send RFQ

Servo motor repair · Delta

Delta servo motor repair

Star Automations repairs Delta servo motors, including ECMA series motors used with ASDA drives. The motor is inspected, the failed parts are repaired or replaced, the encoder is aligned where needed, and the motor is proved on our servo motor test system with a no-load run and a load test before it leaves our bench. Send the nameplate and we confirm repairability first. Star Automations is an independent multi-brand repair company and is not an OEM service centre.

Send the nameplateWhatsApp
Delta ECMA AC servo motor nameplate
  • 25+years of servo repair, since 2000
  • 3,000+customers across India
  • 100+servo brands covered by our universal servo motor test equipment
  • 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
  • Same dayemergency repair option*

*Where the fault and parts allow. Every repaired unit returns with a printed test report.

Repair turnaround you can plan around

Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.

Emergency: same day

For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.

Urgent: 3 working days

Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.

Standard: 7 working days

Full repair, encoder alignment, run test under load and a printed test report.

  • Free repairability check from a nameplate photo
  • Printed test report with every motor
  • Written warranty, terms stated on every quotation
  • Pickup can be arranged; parts that must be imported are quoted with their own timeline
WhatsApp the nameplateSend by email
01Series

Servo motor series we repair

Delta ECMA-C

Servo motor repair and load test.

Delta ECMA-E

Servo motor repair and load test.

Delta ECMA-F

Servo motor repair and load test.

Delta ECMA-G

Servo motor repair and load test.

Delta ECM-A3

Servo motor repair and load test.

02Failures

Common Delta servo motor failures

Encoder and feedback faults

Incremental encoder signal loss or noise showing as position errors and drive alarms.

Bearing noise

High-cycle axes wear bearings early; noise and heat show first.

Brake faults

Brakes that drag on release or slip when holding a load.

Cable and connector damage

Flexing in cable chains breaks feedback and power leads at the motor connector.

03Test bench

What the test bench checks

  • Insulation resistance and hi-pot
  • Winding resistance and balance
  • Encoder or resolver feedback and commutation offset
  • Brake release and holding, where fitted
  • No-load run, then load run; speed and current against the nameplate
  • Vibration and noise at rated speed
04Next

Before you send it

05How to send

How to send the motor

You can send a servo motor from anywhere in India. Talk to us before you courier, so the unit is expected and logged on arrival.

  1. Send the nameplate

    WhatsApp a clear photo of the nameplate, the alarm code and what the machine was doing when it failed.

  2. We confirm repairability

    We tell you whether we can test and repair that model before anything is shipped.

  3. Courier or pickup

    Courier the motor to our bench, or ask us to arrange pickup where needed.

  4. Inspection and quote

    The motor is opened, inspected and photographed. You get the findings and a quote before work starts.

  5. Repair, test, dispatch

    Repaired, run-tested and load-tested, then dispatched with a printed test report.

Delta servo motor series and models we repair

We repair all frame sizes and ratings in these series, including older and discontinued versions. The list is a guide, not a limit: send us the nameplate. See also AC servo motor repair and all servo motor brands.

ECMA

ECMA-C, ECMA-E, ECMA-F, ECMA-G, ECMA-J series in all frame sizes

Other ECM series

ECML low inertia, ECMP flat type, ECM-A3 series

→How it works

From nameplate photo to a tested motor in 7 steps

One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.

  1. 1 · Nameplate photoSend it on WhatsApp or the form
  2. 2 · Repairable? QuoteUsually the same working day
  3. 3 · Courier or pickupThe unit reaches our bench
  4. 4 · Bench diagnosisInsulation, windings, brake, encoder
  5. 5 · RepairFailed parts, bearings, seals, brake
  6. 6 · Align and run-testEncoder aligned; no-load and load run
  7. 7 · Report and dispatchPrinted test report with the unit
  8. Line down?Servo Swap ships a tested unit first. How Servo Swap works

EmergencySame day*

Urgent3 working days

Standard7 working days

*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.

Start with step 1WhatsApp the nameplate
06Questions

Delta servo motor questions

Do you repair Delta servo motors?

Yes, including ECMA series motors used with ASDA drives. Send the nameplate and we confirm repairability before you courier.

Do you need a Delta drive to test the motor?

No. Our servo motor test system runs Delta motors without the original drive, then a load rig applies load.

What should I send for a quote on a Delta motor?

A photo of the nameplate, the alarm code and a note on the symptom. We confirm repairability before you courier.

Is there a warranty?

A written warranty is given after a successful repair. Warranty terms are stated on each quotation.

Example nameplates and feedback devices

Delta servo motor label
Delta servo motor label
Delta ECMA servo motor nameplate
Delta ECMA servo motor nameplate
05Why Star

One universal test bench for Delta and 180+ other servo brands

Most repairers test a servo motor on the drive of its own brand, or not at all. Star Automations tests every Delta servo motor on its Universal Servo Motor Repair Equipment (Mitchell TI-5000JX), India’s first universal servo motor test system. It reads and aligns the feedback device and runs the motor under load without the original drive, so the result is the same whatever the brand.

  • Encoder and feedback read, zero position set and alignment checked before dispatch
  • No-load and load run, with speed and current compared against the nameplate
  • One test report format for every brand, so mixed fleets are easy to compare
  • Motors from machines that mix Delta with other makes can go in a single consignment

Related pages for Delta:

Send the nameplate. We confirm repairability before you courier.

WhatsApp a nameplate photo and the alarm code to +91 97866 22233, or email star@starautomations.com.

Send the nameplateWhatsApp