Emergency: same day
For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.
Bengaluru · Servo motor repair
Delta servo motor repair in Bengaluru
Star Automations repairs Delta servo motors at component level at its facility in Mahadevapura, Bengaluru, for factories, OEMs and machine builders. We find the failed part, repair it and return the unit with a printed report. Star Automations is an independent multi-brand repair company and is not an OEM service centre.
- 25+years of servo repair, since 2000
- 3,000+customers across India
- 100+servo brands covered by our universal servo motor test equipment
- 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
- Same dayemergency repair option*
*Where the fault and parts allow. Every repaired unit returns with a printed test report.
Repair turnaround you can plan around
Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.
Urgent: 3 working days
Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.
Standard: 7 working days
Full repair, encoder alignment, run test under load and a printed test report.
- Free repairability check from a nameplate photo
- Printed test report with every motor
- Written warranty, terms stated on every quotation
- Pickup can be arranged; parts that must be imported are quoted with their own timeline
01Repair
Common Delta servo motor faults we repair
CNC machines, robots, presses and packaging lines around Bengaluru depend on servo motors, and a faulty encoder or bearing stops the axis. Each area is tested on its own, so one bad part does not become a full replacement by default.
Encoder and feedback faults
Encoder and resolver faults that raise alarms, with the commutation offset set after repair.
Bearing noise and vibration
Bearings, shaft and rotor checks.
Brake not holding
Holding-brake faults and brake release circuits.
Winding and insulation faults
Insulation and winding tests before and after repair.
Overcurrent after ingress
Faults after coolant or moisture ingress.
Run test under load
No-load and load run before dispatch, with a printed test report.
02Models
Delta models and series
Scope depends on the model and on the parts we can source. Many servo motors come back with a good winding and a bad feedback device, so checking the encoder first can save replacing the whole motor.
- ECMA series servo motors
03Process
From nameplate to tested unit in five steps
Findings come before repair, so you decide with the facts in front of you.
Send the nameplate
Model, serial number, fault description and a photo, on WhatsApp or the request form. Free repairability check.
Courier or pickup
Courier to our Mahadevapura facility, or ask for pickup. Units should be sent de-energised and disconnected.
Diagnosis and quote
Findings first: the failed part and the repair options, before any part is replaced.
Repair and functional check
Failed components replaced with parts from established distributors, then a functional check on the functions the fault affected.
Report and dispatch
Printed report with findings, parts replaced and test readings, sent back with the unit.
→How it works
From nameplate photo to a tested motor in 7 steps
One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.
- 1 · Nameplate photoSend it on WhatsApp or the form
- 2 · Repairable? QuoteUsually the same working day
- 3 · Courier or pickupThe unit reaches our bench
- 4 · Bench diagnosisInsulation, windings, brake, encoder
- 5 · RepairFailed parts, bearings, seals, brake
- 6 · Align and run-testEncoder aligned; no-load and load run
- 7 · Report and dispatchPrinted test report with the unit
- Line down?Servo Swap ships a tested unit first. How Servo Swap works
EmergencySame day*
Urgent3 working days
Standard7 working days
*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.
Do you repair Delta servo motors in Bengaluru?
Yes. Star Automations repairs Delta servo motors at its facility in Mahadevapura, Bengaluru. Scope depends on the model and on the parts we can source, so send the model and a nameplate photo and we confirm repairability before you send the unit.
Is Star Automations an OEM service centre for Delta?
No. Star Automations is an independent multi-brand repair company and is not an OEM service centre. Warranty decisions stay with the OEM or your supplier.
Which Delta models do you repair?
Typical models include ECMA series servo motors. If your model is not listed, send the nameplate and we will tell you what is possible.
How do I send a Delta servo motor from Bengaluru?
Send the model, serial number, fault description and a nameplate photo on WhatsApp at +91 97866 22233 or through the request form. Pickup can be arranged, or you can courier the unit to our Mahadevapura facility.
How long does Delta servo motor repair take?
Emergency same-day, urgent 3 working days and standard 7 working days are available where the fault and parts allow. The timeline is stated on the quote, and parts that must be imported are quoted with their own timeline.
Do I get a report?
Yes. Every repaired unit returns with a printed report listing the findings, the parts replaced and the test readings.
More from Star Automations in Bengaluru
- Bengaluru industrial electronics hub
- Servo motor repair in Bengaluru
- All servo motors repair, India
- In-stock servo motors
- OEM electronics and testing, Bengaluru
- Technician training
Star Automations is an independent multi-brand repair company and is not an OEM service centre. Brand names are used only to say which units we repair.
Send the Delta servo motor fault from Bengaluru and judge the findings before you commit.
WhatsApp or call +91 97866 22233, or email info@starautomations.com.