Since 2000 · 3,000+ customers

Home / EMS automation / RFID PCB traceability

Board and rack traceability

RFID and 2D Code PCB Traceability for EMS Lines

RFID alone often cannot identify every board in a stacked PCB magazine or rack, because metal and tight spacing block the tags below the top layers. Star Automations designs traceability that combines a 2D board ID, rack tags, slot binding and dock readers, and links the result to the plant's MES, piloted on your line first.

Why RFID alone misses boards in a stack

ProblemWhy it happensFix
Lower boards are not readMetal racks and stacked boards detune and shield tagsOn-metal rack tags and slot binding
Board and rack identity get separatedThe tag is on the rack, not the board2D DataMatrix code on every board, bound to a rack slot
Missed or duplicate readsReader field overlaps adjacent racksDock readers with controlled read zones
Manual scanning at hand-offsOperators scan by hand and skip stepsReaders at docks and portals that scan on movement

How the traceability layers fit together

Traceability layersA 2D code on the board, a rack slot binding, a dock reader, and the MES genealogy record.Board ID2D codeRack slotBound to tagDock readerReads on moveMESGenealogy record

How a pilot runs

  1. MapWe map where boards are stacked, moved and handed over.
  2. Mark and bindBoards get a 2D ID, laser marked where needed, and are bound to rack slots.
  3. ReadReaders at docks and portals capture movement.
  4. LinkEvents are sent to the MES, and results are reviewed against agreed KPIs.

Laser marking of 2D board IDs is available. Read the background in why RFID cannot read the bottom half of a PCB rack.

Frequently asked questions

Why can RFID not read all boards in a stacked rack?

Metal racks and tightly stacked boards shield and detune UHF tags, so lower layers often return no read. A 2D code and slot binding remove the dependence on reading every tag.

Do we still need RFID if boards carry 2D codes?

RFID is useful for rack and magazine movement. The 2D code identifies the board itself. Most lines use both.

Which RFID type is used?

UHF readers with on-metal rack tags are common for racks and docks. The choice is confirmed in the pilot.

Can the data go to our MES?

Yes. Events are sent to the plant's MES through its interface. See MES traceability integration.

Is this running in a plant today?

Star builds this as a pilot on your line, with KPIs agreed first.

Which companies in India provide RFID PCB traceability for EMS plants?

Star Automations offers RFID and 2D-code PCB traceability pilots for EMS and electronics plants in India.