Since 2000 · 3,000+ customers

Home / Servo motor repair / Legacy European and US

Servo motor repair

Legacy European and US servo motor repair in India

Star Automations is an independent servo motor repair company in Puducherry with sites in Chennai and Bengaluru. This page helps you identify an older European or US servo motor by its feedback type (resolver, tacho, EnDat or Hiperface) and choose between repair and a replacement kit. Send the nameplate for a repair assessment.

  • 25+years of servo repair, since 2000
  • 3,000+customers across India
  • 100+servo brands covered by our universal servo motor test equipment
  • 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
  • Same dayemergency repair option*

*Where the fault and parts allow. Every repaired unit returns with a printed test report.

Repair turnaround you can plan around

Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.

Emergency: same day

For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.

Urgent: 3 working days

Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.

Standard: 7 working days

Full repair, encoder alignment, run test under load and a printed test report.

  • Free repairability check from a nameplate photo
  • Printed test report with every motor
  • Written warranty, terms stated on every quotation
  • Pickup can be arranged; parts that must be imported are quoted with their own timeline

Send your motor model for the price

Prices are not listed because every motor and fault is different. Send the nameplate, a photo and the fault description, and the price comes with the quote. Every repair carries a warranty; terms are on the quote.

Feedback types on legacy servo motors

Feedback typeWhat it isWhat we do
ResolverAnalog signal, rugged, common on older servo motorsOffset check and alignment after bearing or rotor work, signal test
TachoAnalog speed feedback on older motorsTacho signal test, connector and cable check, repair or replacement of the feedback part
EnDatDigital absolute encoder protocolEncoder test, realignment and verification on the bench
HiperfaceDigital serial encoder protocolEncoder test, memory and alignment check, repair of the motor body

Read the feedback type from the nameplate or the encoder label. If you cannot identify it, send photos of the motor and the connector and we will say what it is.

How a Legacy European and US motor repair runs

  1. Inspect and quoteThe motor is inspected at Puducherry, Chennai or Bengaluru and a quote is sent.
  2. Fault findingWinding, bearings, brake and feedback are checked on the bench.
  3. Repair and alignmentFailed parts are repaired or replaced and the encoder or resolver is aligned.
  4. Bench test and dispatchThe motor is bench tested on the universal servo motor test system, then dispatched.
Legacy European and US repair flowLegacy European and US motor: inspect, find the fault, repair and align, then bench test and dispatch.InspectNameplate and faultRepairParts and windingAlignEncoder or resolverBench testUniversal system

Turnaround: emergency same day, urgent 3 days, standard 7 days, depending on the fault and parts. Independent repair; Star is not an OEM service partner.

Repair or replacement kit

Most older motors can be repaired when the winding, bearings and feedback device are in repairable condition. If a motor cannot be repaired, a replacement kit with a matched motor, adapter and drive set-up may be the next step. See obsolete servo motor replacement. Send the nameplate and fault description and we say which route fits.

→How it works

From nameplate photo to a tested motor in 7 steps

One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.

  1. 1 · Nameplate photoSend it on WhatsApp or the form
  2. 2 · Repairable? QuoteUsually the same working day
  3. 3 · Courier or pickupThe unit reaches our bench
  4. 4 · Bench diagnosisInsulation, windings, brake, encoder
  5. 5 · RepairFailed parts, bearings, seals, brake
  6. 6 · Align and run-testEncoder aligned; no-load and load run
  7. 7 · Report and dispatchPrinted test report with the unit
  8. Line down?Servo Swap ships a tested unit first. How Servo Swap works

EmergencySame day*

Urgent3 working days

Standard7 working days

*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.

Frequently asked questions

What is a legacy servo motor?

A legacy servo motor is an older model that the maker no longer sells or supports. Many are still in service on Indian plants and can often be repaired.

How do I identify the feedback type on an old servo motor?

Check the nameplate and the encoder or resolver label, and look at the connector. If you are unsure, send photos and we will identify it.

Can an old resolver or tacho motor be repaired?

Often yes. We test the feedback device, repair or replace what has failed and align it before the bench test.

Do you need the original drive to test the motor?

No. The motor is bench tested on the universal servo motor test system without the original drive.

When should I consider a replacement kit instead of repair?

When the winding or housing is beyond repair or no spare feedback part can be found. We then propose a matched motor, adapter and drive set-up.

What should I send?

The nameplate photo, the fault or alarm, and the make and model of the machine. Send it on WhatsApp +91 97866 22233 or by the contact form.