Since 2000 · 3,000+ customers

Home / EMS automation / Functional, ICT and test jig systems

Test stations and jigs

Functional, ICT and Test Jig Systems for PCBs and Electronics

Functional and in-circuit tests check that a board or product works before it ships. Star Automations designs and builds test stations and jigs for electronics and motor products, running electrical checks such as insulation, hipot, communication and feedback tests, with results logged for traceability. The plant sets its own pass limits and validates the station.

What a station can check

CheckWhat it tells youApplies to
InsulationIsolation between circuits and framePower boards, motors, drives
HipotDielectric withstand of the insulation systemPower products, motors, drives
Winding resistancePhase balance and winding faultsMotors
Back-EMFMagnet and winding correctnessPM and BLDC motors
No-load current and speedBasic running behaviorMotors, drives
Hall and encoder feedbackFeedback signals are present and correctMotors, drives, encoders
CommunicationBus or serial link worksBoards, drives, encoders

Functional test and in-circuit test coverage is scoped per board after a design study.

How a station is built

  1. Design studyWe review the product, the test list and the pass limits you set.
  2. Fixture and softwareThe jig, wiring and test software are built to the product.
  3. Bench test and tuneThe station is tuned on sample products on the bench.
  4. HandoverYour team validates the station against its own acceptance criteria.

Test station layout

Test station layoutA product sits in the jig, the station runs the electrical checks, results are logged, and the product passes or is sent to repair.JigProduct clampedChecksElectrical testsLogResult storedPass or repairDecision

Frequently asked questions

What is functional testing for PCBs?

A powered test that checks a board or product does its job, such as outputs, communication and feedback, before shipping.

What is ICT testing?

In-circuit testing checks components and connections on a board. Star scopes the coverage you need after a design study.

Do you build test jigs?

Yes. Star has built test stations and jigs for motor and drive products. Share the product and the test list.

Can results go to our MES?

Yes. Results can be logged and sent to the plant's MES. See MES traceability integration.

Can you repair our existing test equipment?

Star repairs electronics and test equipment at component level. See PCB repair and test equipment.

Who validates the station?

The plant. Star hands over the station with its test list, and your team validates it against your acceptance criteria.