Best known across India for multi-brand servo motor repair, our lab also repairs the machinery-protection cards that guard turbines, compressors and pumps.
Bently Nevada 3500 module repair in India
Star Automations, an independent multi-brand repairer (not OEM-authorised), repairs Bently Nevada 3500 machinery-protection modules at board level in Puducherry, India: 3500/15, 3500/22M, 3500/42M, 3500/32M, 3500/33 and other monitors. Each module gets a bench check and a test report. Indian plants courier modules in; Gulf plants send them for import, repair and re-export.
Why does Bently Nevada 3500 repair matter now?
When a 3500 module fails, the choice is often a wait for a new module or a full retrofit. Board-level repair keeps the existing rack in service.
- The 3500 is one of the most widely installed machinery-protection systems. Baker Hughes reports more than 85,000 systems installed worldwide.
- Baker Hughes' published lifecycle plan expects the 3500 to move to spares-only support after about 2027, and later to repair-only support. The older 3300 system is already obsolete.
Can Bently Nevada 3500 modules be repaired in India?
Yes. Star Automations repairs 3500 modules at board level in Puducherry and bench checks each one. Send the part number and fault, and we confirm repairability before you ship.
| Module | Role | Common faults |
|---|---|---|
| 3500/05 rack and backplane | system rack | connector and backplane damage |
| 3500/15 | power supply | no output, failed input stage, ageing capacitors |
| 3500/22M | transient data interface (TDI) | communication port faults, processor board faults |
| 3500/42M | proximitor / seismic monitor | channel failures, buffered output faults |
| 3500/32M and 3500/33 | relay modules | relay and driver failures |
| Other 3500 monitors (3500/40M, 3500/45, 3500/50, 3500/53, 3500/60, 3500/61, 3500/62, 3500/92) | monitoring and communication | send the part number |
Also on request: 1900/65A general-purpose equipment monitor; 3300 modules, reviewed case by case because the system is obsolete.
What should I do before sending a 3500 module?
Save your rack configuration, then send the module details so we can confirm repairability.
- Save the rack configuration and keep your own backup.
- Send the full part number, a photo of the label, the slot position and the fault or alarm seen.
- We confirm repairability before you ship.
How is a repaired 3500 module checked?
Each repaired module gets a board-level repair and a bench check of its circuits. The checks done are listed on the test report by serial number.
- The plant installs the module in its own rack, downloads the configuration and checks the channels before returning the machine to protection.
- For a module used in a SIL-rated protection function, the plant re-validates that function under its own procedures.
Can Gulf plants send Bently Nevada 3500 modules to India?
Yes. We have repaired DCS and machinery-monitoring cards imported from Kuwait and re-exported them after repair.
Import for repair and re-export runs under Star's own Importer-Exporter Code: international repair-return for overseas plants.
Why do plants choose Star Automations?
Star Automations – multi-brand servo motor, drive, PLC and DCS card repair, ISO 9001:2015 certified.
ISO 9001:2015 certified; 3,000+ customers; 100+ brands; GeM-registered vendor; supplied BHEL, Indian Railways and NLC; five locations: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi. Every repair carries a warranty; terms are on the quote.
Bently Nevada 3500 repair: frequently asked questions
Who repairs Bently Nevada 3500 modules in India?
Star Automations, an independent ISO 9001:2015 certified repair company in Puducherry, repairs 3500 modules at board level, including 3500/15, 3500/22M, 3500/42M, 3500/32M and 3500/33.
Are you a Baker Hughes service centre?
No. We are an independent repairer, not OEM-authorised. For OEM service, contact Baker Hughes.
Can a 3500/42M with a dead channel be repaired?
Often, yes. Channel faults are usually in the board's input or output circuits. Send the part number and the fault and we confirm before you ship.
How is the repaired module checked?
We repair it at board level and bench check its circuits; the checks are listed on the test report. Your team installs it, downloads the configuration and checks the channels in your rack.
Will I lose the module configuration?
Keep your own configuration backup. Plan to download the configuration again after the module is installed.
Do you repair the older 3300 system?
The 3300 is obsolete and some components are scarce, so we review each 3300 module case by case.
Can plants in Kuwait, the UAE or Saudi Arabia use your service?
Yes. We have repaired DCS and machinery-monitoring cards imported from Kuwait and re-exported them after repair, under our own Importer-Exporter Code.
Is there a warranty?
Every repair carries a warranty; terms are on the quote.
Send the 3500 module details for a repair quote
Send the part number, slot position, a photo of the label and the fault on WhatsApp +91 97866 22233 or by email to info@starautomations.com. We are an independent repairer, not OEM-authorised.