Best known across India for multi-brand servo motor repair, our component-level lab also repairs the control-system cards that keep process plants running.
DCS card and module repair in India, for every major control system
Star Automations, an independent multi-brand repairer (not OEM-authorised), repairs DCS, safety-system and turbine control cards at board level: Yokogawa, Honeywell, Emerson, ABB, Siemens, Foxboro, Triconex, HIMA, GE and Woodward. Our factory is in Puducherry, with offices in Chennai, Bengaluru, Hyderabad and Delhi. Indian plants courier cards in; Gulf plants send them for import, repair and re-export.
Why repair a DCS card when the maker says migrate?
A full migration is a project, while a failed card is a breakdown. Board-level repair keeps the running system going while the plant plans its migration.
- Many plants run control-system releases that the maker no longer supports. Yokogawa lists CENTUM CS 3000 releases R3.08.10 to R3.09.50 as end of support, and Honeywell TDC 3000 is past its published support date.
- We are an independent repairer, not OEM-authorised, and we do not claim to be any maker's service centre.
Who repairs Yokogawa, Honeywell, Emerson and other DCS cards in India?
Star Automations repairs DCS cards from Yokogawa, Honeywell, Emerson, ABB, Siemens and Foxboro systems at board level in Puducherry, India. Send the full part number and revision, and we confirm the specific module before you ship.
| System | Typical modules we receive |
|---|---|
| Yokogawa CENTUM VP, CS 3000, CS 1000 | processor, I/O (AAI, AAV, AAT, AAR, ADV), ESB bus and node modules, power supplies. See Yokogawa CENTUM VP module repair |
| Honeywell Experion PKS, TDC 3000 | C200 and C300 controller and I/O, HPM and APM boards, power supplies |
| Emerson DeltaV, Ovation | controllers, I/O cards, communication modules, power supplies |
| ABB System 800xA, Bailey Infi 90 / Symphony | AC 800M and S800 I/O, Infi 90 / Symphony modules, power supplies |
| Siemens SIMATIC PCS 7 | controller, communication and I/O modules, power supplies |
| Foxboro I/A Series | FBM I/O modules, control processors, power supplies |
| Bently Nevada 3500 | machinery protection modules. See Bently Nevada 3500 module repair |
| Triconex, HIMA | safety-system hardware (see the safety-system section below) |
| GE Mark VI and Mark VIe, Woodward | turbine control cards (see the turbine control section below) |
What faults can be repaired on a DCS card?
Most DCS card failures are board-level faults in power stages, input and output circuits, memory and communication parts. We find the fault at component level, replace the failed parts and bench check the card. The test method for each card is stated on the quote and on the test report.
| Module type | Typical faults | What we do |
|---|---|---|
| Controller, CPU and processor cards | no boot, watchdog trips, memory and backup-battery faults | board-level fault finding, component replacement, bench functional check |
| Analog and digital I/O cards | dead channels, drift, open-loop alarms | channel-by-channel check and component replacement |
| Communication and bus modules | link failures, redundancy alarms | board repair and bench functional check |
| Power supply modules | no output, ripple, overheating | rebuild of the power stage and a functional check under load |
| Termination and marshalling boards | burnt tracks, damaged connectors | track repair and connector replacement |
Can Triconex and HIMA safety-system cards be repaired?
Yes. We repair the hardware of Triconex and HIMA safety-system modules at board level and bench test them. Hardware repair and bench test; the plant re-validates the safety function.
- Each module returns with a test report by serial number.
- Proof testing and re-validation of the safety function stay with the plant, under its own safety procedures, before the module goes back into service.
Can GE Mark VI, Mark VIe and Woodward turbine control cards be repaired?
Yes. We repair GE Mark VI and Mark VIe control and I/O boards and Woodward turbine and governor control cards (for example the 505 family) at board level.
- Each card is bench checked and returns with a test report by serial number.
- The plant re-installs the card and checks the turbine control function under its own procedures.
How do I send a DCS card for repair?
Send the card details on WhatsApp first, then ship the card once repairability is confirmed.
- Send the part number, revision, a photo of the label and the fault or alarm seen.
- We confirm repairability and the test method.
- Ship the card in an ESD bag.
- Board-level repair and bench functional check, with a report by serial number.
- The card returns to you with its report.
Can Gulf and overseas plants send DCS cards to India?
Yes. We have repaired DCS and machinery-monitoring cards imported from Kuwait and re-exported them after repair.
- Star holds its own Importer-Exporter Code and handles import for repair and re-export under India's customs and DGFT provisions. Details: international repair-return for overseas plants.
- Each unit returns with a test report by serial number and the export documents.
Why do plants choose Star Automations for DCS card repair?
Star Automations – multi-brand servo motor, drive, PLC and DCS card repair, ISO 9001:2015 certified.
- ISO 9001:2015 certified repair process
- 3,000+ customers and 100+ brands repaired
- GeM-registered vendor; supplied BHEL, Indian Railways and NLC
- In-house lab: QMAX IC tester, oscilloscopes, LCR meter, fault locator, SMD rework with IR pre-heater, electronic load tester. See PCB repair test equipment
- Five locations: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
- Every repair carries a warranty; terms are on the quote.
DCS card repair: frequently asked questions
Can you repair a DCS card that the maker no longer supports?
Often, yes. We repair at board level, so an obsolete card can be repaired when the board and its key parts are sound. Send the part number and revision and we confirm before you ship.
Which control systems do you repair?
Yokogawa CENTUM, Honeywell Experion and TDC 3000, Emerson DeltaV and Ovation, ABB 800xA and Bailey, Siemens PCS 7, Foxboro I/A, Bently Nevada 3500, Triconex and HIMA safety systems, and GE Mark VI and Woodward turbine controls.
Are you an OEM service centre for these makers?
No. Star Automations is an independent repairer, not OEM-authorised. We repair at board level and report what we did on each card.
How do you test a repaired card?
Each card gets a bench functional check suited to its type. The method is stated on the quote and the result is on the test report by serial number.
Do you repair Triconex and HIMA safety-system cards?
Yes, we repair the hardware and bench test it. The plant proof-tests and re-validates the safety function under its own procedures before use.
Do you repair GE Mark VI and Woodward turbine control cards?
Yes, at board level, with a bench check and a test report. The plant checks the control function after re-installation.
Will the card's configuration be kept?
We tell you before repair whether the card holds configuration or firmware and how it is handled. Keep your own configuration backup as well.
Can a plant in Kuwait, the UAE or Saudi Arabia send cards to India?
Yes. We have repaired DCS and machinery-monitoring cards imported from Kuwait and re-exported them after repair. Star holds its own Importer-Exporter Code.
Is there a warranty?
Every repair carries a warranty; terms are on the quote.
Where are you located?
Our repair factory is in Puducherry, with offices in Chennai, Bengaluru, Hyderabad and Delhi.
Send the card details for a DCS card repair quote
Send the part number, revision, a photo of the label and the fault or alarm on WhatsApp +91 97866 22233 or by email to info@starautomations.com. We are an independent repairer, not OEM-authorised.