Since 2000 · 3,000+ customers

Hengstler · Hengstler RA 58 / Unico 319-663

Hengstler RA 58 and Unico 319-663 SSI encoder repair

Hengstler RA 58 / Unico 319-663 is a SSI serial, 24 bit encoder with 4,096 counts per turn. We test it, repair or replace it and align it to the rotor. Found on: Unico servo motors. Star Automations is an independent multi-brand repair company and is not an OEM service centre.

Hengstler RA 58 / Unico 319-663 encoder test
  • 25+years of servo repair, since 2000
  • 3,000+customers across India
  • 100+servo brands covered by our universal servo motor test equipment
  • 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
  • Same dayemergency repair option*

*Where the fault and parts allow. Every repaired unit returns with a printed test report.

Repair turnaround you can plan around

Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.

Emergency: same day

For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.

Urgent: 3 working days

Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.

Standard: 7 working days

Full repair, encoder alignment, run test under load and a printed test report.

  • Free repairability check from a nameplate photo
  • Printed test report with every motor
  • Written warranty, terms stated on every quotation
  • Pickup can be arranged; parts that must be imported are quoted with their own timeline
01Facts

Hengstler RA 58 / Unico 319-663 at a glance

DeviceHengstler RA 58 / Unico 319-663
Brand familyHengstler
Type and formatSSI serial, 24 bit
Counts4,096 counts per turn
Found onUnico servo motors
ConnectorPer motor model
Pole setting for alignmentSelectable

The Unico 319-663 appears to be the same encoder as the Hengstler Type RA 58, a 24 bit SSI serial encoder. It needs clock and data lines and a separate supply, and the direction input decides whether the count rises for clockwise rotation.

02Faults

How Hengstler RA 58 / Unico 319-663 encoders usually fail

  • No SSI data from a board or cable fault
  • Wrong supply voltage
  • Wrong count direction after rewiring
  • Alignment that no longer matches the rotor
03Process

How the repair is done

  1. Receive and identify

    We read the nameplate and encoder label and confirm the exact type.

  2. Test

    Count per turn, data status, alarm flags and, where fitted, incremental lines are checked on the bench.

  3. Repair or replace

    Board, connector or sensor faults are repaired; a matched encoder is fitted where repair is not sensible.

  4. Align

    Commutation is set to the rotor and checked at every pole pair using the electrical angle.

  5. Verify and report

    The motor is run on the bench and the readings are recorded in the report.

See encoder alignment, memory programming and replacement.

04Related

Other Hengstler encoders we repair

05FAQ

Questions

Can you repair a Hengstler RA 58 / Unico 319-663 encoder?

Yes. We test the position count and status, repair or replace the encoder, align it to the rotor and run the motor. We repair Hengstler units; Star Automations is an independent multi-brand repair company and is not an OEM service centre.

Is the Unico 319-663 the same as the Hengstler RA 58?

It appears to be the same encoder.

Which interface does it use?

SSI, with clock and data lines.

What should I send for a Hengstler RA 58 / Unico 319-663 enquiry?

A clear photo of the motor nameplate and, if the cover is off, the encoder label. You can send the motor or only the encoder.

06Enquiry

Send the nameplate or encoder label

A clear photo of the motor nameplate and, if the cover is off, the encoder label is enough to start. We reply with whether it can be repaired and a quote.

We use these details to reply to your enquiry. See our privacy policy.

→How it works

From nameplate photo to a tested motor in 7 steps

One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.

  1. 1 · Nameplate photoSend it on WhatsApp or the form
  2. 2 · Repairable? QuoteUsually the same working day
  3. 3 · Courier or pickupThe unit reaches our bench
  4. 4 · Bench diagnosisInsulation, windings, brake, encoder
  5. 5 · RepairFailed parts, bearings, seals, brake
  6. 6 · Align and run-testEncoder aligned; no-load and load run
  7. 7 · Report and dispatchPrinted test report with the unit
  8. Line down?Servo Swap ships a tested unit first. How Servo Swap works

EmergencySame day*

Urgent3 working days

Standard7 working days

*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.