Siemens · Drives
6SL3224-0BE25-5UA0 — Siemens SINAMICS G120 PM240 power module: fault codes, repair & supply
The 6SL3224-0BE25-5UA0 is a SINAMICS G120 PM240 power module that works together with a G120 control unit. Star Automations sources and supplies the 6SL3224-0BE25-5UA0 and repairs failed units at component level, so you can choose between a replacement and getting your existing unit restored. This is a current OEM line. Availability and price are confirmed per enquiry. Most quotes come back the same day — send the part number or the fault code on WhatsApp.
Common SINAMICS G120 PM240 fault codes and what we usually find
Fault code wording can differ by firmware and manual revision — always confirm against the manual for your exact unit. The causes below are typical findings, not a diagnosis of your specific unit.
| Code | Meaning | Typical cause |
|---|---|---|
| F30001 | Overcurrent | Failed IGBT stage, motor cable short, wrong motor data |
| F30002 | DC link overvoltage | Fast ramp-down, brake resistor fault, aged DC capacitors |
| F30003 | DC link undervoltage | Supply dip, rectifier or precharge fault |
| F30004 | Drive overtemperature | Blocked heatsink, failed fan |
| F30005 | Drive I2t overload | Sustained overload, degraded power stage |
| F30021 | Ground fault | Motor or cable insulation, current sensing fault |
When a 6SL3224-0BE25-5UA0 needs attention
- Fault F30001 or F30002 on the control unit
- Power module will not start with a known-good control unit
- Loud or failed heatsink fan
- Burn marks near the IGBT or gate-drive section
- Blown input fuses on power-up
Replace or repair your 6SL3224-0BE25-5UA0
Source a replacement
Send the part number. We check sourcing from global surplus and the OEM channel and reply the same day with availability, condition and price. Advance or verified escrow applies.
Repair your existing unit
If sourcing takes longer or you want to keep your configuration, we repair at component level — power stage, gate-drive, control and supply sections — and test before dispatch.
What people look up for the 6SL3224-0BE25-5UA0
- SINAMICS G120 F30001 overcurrent
- SINAMICS F30002 DC link overvoltage
- PM240 power module repair
- 6SL3224-0BE25-5UA0 repair
- Siemens G120 repair India
6SL3224-0BE25-5UA0 — common questions
Can you supply the 6SL3224-0BE25-5UA0 in India?
Can a faulty 6SL3224-0BE25-5UA0 be repaired instead of replaced?
My 6SL3224-0BE25-5UA0 shows F30001 (overcurrent). What should I do?
Is the exact part number important?
Need the 6SL3224-0BE25-5UA0 now?
Send the part number or fault code — we reply the same day. Serving Chennai, Puducherry, Bengaluru, Hyderabad, Delhi and pan-India.