Since 2000 · 3,000+ customers

Preventive maintenance spares for VFDs, PLCs, CNCs and robots

Preventive Maintenance Spares for VFDs, PLCs, CNCs and Robots

Star Automations supplies preventive maintenance spares across India for VFDs, servo drives, PLCs, CNCs and industrial robots: backup batteries with the correct connector, cooling fans, DC-link capacitors, semiconductor fuses, cable harnesses, drag chains, robot grease and bearings. Items are stocked for regular customers and others are sourced. Send the nameplate and a photo of the old part. We are an independent supplier, not an OEM service partner.

PM spares we supply

CategoryWhat we supplyWhat we check before supply
Backup batteriesPLC, CNC, robot and servo amplifier batteries for Fanuc, Mitsubishi, ABB, Siemens, Allen-Bradley and Schneider controllersVoltage and chemistry, connector housing, latch and polarity
Cooling fansFans for VFDs, CNC amplifiers and robot cabinets2-wire or 3-wire alarm, speed, airflow, size, voltage and plug
DC-link capacitorsElectrolytic and film capacitors for drives and invertersCapacitance, voltage, ripple rating and terminal type. See capacitor reforming
Semiconductor fusesaR and gR fuses for rectifiers, IGBT bus and soft startersClearing rating, voltage, size and mounting. See fuses and circuit protection
Cable harnesses and connectorsServo power, brake and feedback harnesses, teach-pendant cables, robot dress-pack cables, circular connectorsPinout, shielding, bend radius and continuity and hi-pot test. See cable harness
Drag chains and dress-pack partsCable drag chains, guide channels, strain-relief parts and robot conduitsInner size, bend radius, pitch and travel length
Robot grease, bearings and sealsOEM-specified robot grease grades, precision bearings and oil sealsGrease grade and quantity, bearing type and clearance

Stock and sourcing

Batteries, fans, capacitors, fuses, grease and bearings are kept in stock for our regular and priority customers. Other items, including discontinued parts, are sourced for you. Availability is confirmed on the quote.

Common PM spare mistakes and how to avoid them

  • Right cell, wrong connector Match the connector housing, latch and polarity as well as the cell, or the battery will not plug in.
  • Battery swapped without a backup Back up the parameters and follow the maker procedure so that memory and encoder data are not lost.
  • 2-wire fan on a 3-wire drive The drive reads the missing speed signal as a fan fault.
  • Fan matched on size and voltage only Check speed and airflow too, or the drive overheats under load.
  • Wrong grease or too much grease Use the grease grade and quantity the robot maker specifies, and keep drain ports clear.
  • Standard cable in a moving chain Use high-flex shielded cable and a chain sized for the bend radius to avoid early cable failure and encoder faults.

When a plant needs the part urgently

  • Night delivery A customer needed a part urgently at night. We opened our shop and delivered it.
  • Air cargo to a long-standing customer A spare was sent by direct air cargo to a customer we have supplied for many years.

Cable harnesses from our Bengaluru facility

Our Bengaluru facility has cable harness machines for automatic wire stripping and crimping, with tensile testing and final testing, including continuity and hi-pot testing. We can supply UL-certified and EU-certified parts for harness work. Send a sample or a drawing. See the cable harness page.

Mechanical rework, coating and laser cleaning

  • Rework Minor mechanical work is done by us. Other work such as shafts, flanges and bearing housings goes through our partners.
  • High-accuracy parts Parts that need very high accuracy can be sent abroad for rework and returned to you.
  • Coating We offer several types of coating and coating service.
  • Laser cleaning Laser cleaning removes dust and contamination from components.

Safe battery swap in four steps

  1. Match the battery Check voltage, chemistry, connector and polarity against the old battery.
  2. Back up Save the program, parameters and mastering data.
  3. Swap with power on Follow the maker manual and swap within the hold time.
  4. Confirm Check that the low-battery alarm clears and note the next replacement date.

How it works

  1. Send the nameplate Photo of the equipment and the old part on WhatsApp or the quote form.
  2. We match the part Connector, ratings and fit are checked.
  3. You get a quote Availability is confirmed on the quote.
  4. Supply The part is supplied from stock or sourced.

Frequently asked questions

Why did my replacement PLC or CNC battery not fit when the cell matched?

The same lithium cell is fitted with different connector housings, latches and polarity depending on the PLC, CNC, servo amplifier or robot. Send a photo of the old battery and the controller nameplate, and we match the connector as well as the cell.

What happens if I change a backup battery with the power off?

Many controllers keep memory alive from the battery only while control power is on or within a short hold time. Changing the battery with power off can clear parameters or encoder data. Back up first and follow the maker manual for the swap.

What is the difference between a 2-wire and a 3-wire cooling fan?

A 3-wire fan has a third wire that reports speed or a locked-rotor alarm to the drive. If a 2-wire fan replaces it, the drive can show a fan fault and refuse to run.

Why do fan speed and airflow matter when size and voltage already match?

A fan that matches the size and voltage but runs slower moves less air. The drive can then overheat and trip under load some days later.

When should DC-link capacitors in a VFD be replaced or reformed?

When the drive has aged, stood unused for a long time, or shows ripple or bus faults. See our capacitor reforming page for the process.

Why can a standard fuse not replace a semiconductor fuse in a drive?

Semiconductor fuses clear fault current much faster to protect rectifiers and IGBTs. A general-purpose fuse clears too slowly for that duty.

Do you build cable harnesses and supply drag chains?

Yes. Harnesses are built at our Bengaluru facility with automatic wire stripping, crimping, tensile testing and final testing, including continuity and hi-pot testing. Drag chains and dress-pack parts are supplied to match the sample or drawing.

Can you rework worn or discontinued mechanical parts?

Minor mechanical work is done by us. Other work goes through partners, and parts that need very high accuracy can be reworked abroad and returned. We also offer coating and laser cleaning of components.

Related services

Star Automations is an independent supplier and repair company, not an OEM service partner. Brand names identify compatible parts only.