Make in India · AC servo motors
Made in India AC servo motor, 100 W to 1 kW
Star Automations offers Indian-made AC servo motors and matched drives from 100 W to 1 kW: 200–240 V single phase, 22-bit absolute or incremental encoder, 3000 rpm rated, 0.3 to 4.8 Nm rated torque, pulse or EtherCAT control, with or without brake.
Star Automations supplies and supports these products. They are manufactured in India by an established Indian industrial manufacturer.
Indian-made servo motor, key facts
- 100 W to 1 kWFive ratings: 100, 200, 400, 750 W and 1 kW
- 22-bit encoderOptical, incremental or absolute
- 200–240 V ACSingle phase supply
- Pulse or EtherCATBasic pulse, advanced pulse, EtherCAT
- STO safetySafe torque off and electronic CAM
- One-touch tuningFaster commissioning
- Brake optionWith brake or without brake
- Made in IndiaManufactured by an Indian industrial manufacturer
Servo motor ratings and technical data
Published manufacturer data for the 100 W to 1 kW series. Rated torque is at rated speed.
| Item | 100 W | 200 W | 400 W | 750 W | 1 kW |
|---|---|---|---|---|---|
| Supply | 200–240 V AC single phase | ||||
| Rated / max current (A) | 0.85 / 2.7 | 1.7 / 5.2 | 2.8 / 9 | 5.8 / 18.5 | Low 5.5 / 18.2 Medium 5.8 / 17.4 |
| Rated / max torque (Nm) | 0.3 / 0.96 | 0.6 / 1.92 | 1.3 / 3.81 | 2.4 / 7.2 | Low 3.2 / 9.5 Medium 4.8 / 14.4 |
| Rated / max speed (rpm) | 3000 / 6000 | 3000 / 6000 | 3000 / 6000 | 3000 / 6000 | Low 3000 / 5000 Medium 2000 / 3500 |
| Rotor inertia | Low | Low | Low | Low | Low and medium |
| Frame size (mm) | 40 | 60 | 60 | 80 | 130 |
| Shaft diameter (mm) | 8 | 14 | 14 | 19 | 24 |
| Weight (kg) | 0.7 | 1.3 | 1.6 | 3.1 | 7.5 |
| Common to all ratings | Detail |
|---|---|
| Encoder | 22-bit optical, incremental and absolute |
| Control mode | Position, speed and torque control |
| Communication | Basic pulse, advanced pulse and EtherCAT |
| Brake | Available with brake and without brake |
| Protection functions | Overcurrent, under voltage, overvoltage, overheat, overload, encoder error, regenerative error, overspeed, excessive error, serial communication error, motor matching error, motor impact error, U-V-W short circuit, control circuit error |
| Accessories | Power cable, encoder cable and I/O connector |
Data is as published by the manufacturer and is subject to revision. Send your requirement for the current datasheet and dimension drawing.
What the drive and motor give your machine
Safe torque off and electronic CAM
Built-in STO function for machine safety circuits, and electronic CAM for synchronised motion such as flying cut and filling.
Fast speed response
Low rotor inertia and high-density torque for quick acceleration and tight positioning.
Disturbance and backlash compensation
Drive-side compensation keeps motion smooth when the load or gearbox is not perfect.
Resonance and vibration reduction
Tuning functions reduce resonance, and one-touch tuning shortens commissioning.
Where Indian-made servo motors are used
- Material handlingConveyors, pick and place, indexing
- CNC and wood carvingLight CNC axes, routers, engraving
- High speed fluid fillingFilling and dosing machines
- PressingServo press and assembly press
- RoboticsGantry and small robot axes
- Assembly linesAutomated assembly and test stations
- Sealing and labellingPackaging, sealing, label applicators
- Special purpose machinesNew machine builds by OEMs
Why choose a Made in India servo motor
Local supply and support
Indian manufacturing means shorter supply lines, a local technical contact and spares that are not held up at customs.
Tender and local content needs
For public procurement or customer audits that ask for local content, send the requirement. We obtain the manufacturer's local-content documentation for your project.
Easier for new machine builders
A single Indian source for servo motors, drives and linear actuators, so a new machine design can be matched and supported together.
Service after sale from Star
Star Automations repairs servo motors and drives of many brands in Chennai, Puducherry and Bengaluru. See servo motor repair.
How to choose the right rating
- Torque: add friction, load and acceleration torque, then keep the peak under the maximum torque and the continuous value under rated torque.
- Speed: check the required rpm against rated speed. The 1 kW medium inertia motor is rated 2000 rpm, the others 3000 rpm.
- Inertia ratio: choose low inertia for fast cycles, medium inertia for loads that are hard to damp.
- Encoder: choose absolute where the axis should not need homing after power loss.
- Brake: choose a brake motor for vertical or hanging loads.
- Control: pulse train for most PLC positioning, EtherCAT for multi-axis networks.
Not sure? Send the load, stroke, cycle time and supply. We help with the sizing.
Replacing an imported servo motor
Machines that run Mitsubishi, Delta, Panasonic or Omron servos can often be moved to an Indian-made servo. Fit depends on frame, shaft, torque, encoder and drive interface, so send the nameplate and we compare. See also obsolete servo replacement and servo motors.
Related Made in India products
- Made in India electric actuatorsRod and rodless actuators with servo motors
- Made in India drone BLDC motorsAgri and light-weight UAV motors
- Make in India motion controlAll Indian-made motion products
- Servo motor repairRepair for all brands
Tell us your application
Product, rating or size, application and yearly quantity are enough to start. OEM and volume enquiries are welcome.
Message received
Our team replies by email or WhatsApp with the next step. For anything urgent, WhatsApp +91 97866 22233.
Common questions
Are these servo motors really made in India?
Yes. The servo motors and drives offered here are manufactured in India by an established Indian industrial manufacturer. Star Automations supplies them and supports them with application engineering and service.
What power ratings are available?
100 W, 200 W, 400 W, 750 W and 1 kW. Frame sizes are 40, 60, 60, 80 and 130 mm respectively.
What supply voltage do they use?
200–240 V AC single phase.
What encoder do the servo motors have?
A 22-bit optical encoder, available as incremental or absolute.
Which communication modes are supported?
Basic pulse, advanced pulse and EtherCAT. Control modes are position, speed and torque.
Is a motor with brake available?
Yes. Each rating is available with brake and without brake.
Does the drive have a safety function?
Yes. The drive offers a safe torque off (STO) function and electronic CAM, plus protections such as overcurrent, overvoltage, overload, encoder error and short circuit.
Can it replace a Mitsubishi, Delta, Panasonic or Omron servo?
Often yes for new or retrofit designs, but fit depends on frame, shaft, torque, encoder and drive interface. Send the nameplate and we compare before you order.
Can I get local-content documentation for a tender?
Send the tender requirement. Local-content declarations are issued by the manufacturer for each project, and we obtain it for you.
Do you also repair servo motors and drives?
Yes. Star Automations repairs servo motors and drives of many brands. See the servo motor repair page.