TNERC harmonic rule
TNERC harmonic compliance in Tamil Nadu: what the rule says and how to prepare
Star Automations is an independent industrial electronics and drives engineering company in Puducherry, serving plants across Tamil Nadu. TNERC Notification TNERC/SC/7-47 (29 March 2022) requires HT consumers, prosumers and charging stations to meet IEEE 519-2014 harmonic limits. We guide plants through the rule: reading the measurement, finding which loads cause the distortion, and specifying filters. Star works as a consultant. The Licensee measures, and a filter vendor supplies the filter.
What the TNERC harmonic rule says
The amendment changes regulation 4(1)(iv) of the Tamil Nadu Electricity Supply Code. It sets harmonic limits for the supply the Licensee gives you.
| Notification | TNERC/SC/7-47, dated 29 March 2022 |
|---|---|
| Gazette | Tamil Nadu Government Gazette No. 38, 21 September 2022 |
| Applies to | Bulk consumers at 33 kV and above; consumers and prosumers at 11 kV and 22 kV; charging stations. HT tariff IV (Lift Irrigation) is excluded. |
| Limits | IEEE Std. 519-2014, as amended from time to time |
| Meter | Portable power quality meter, IEC 61000-4-30 edition 3.0, Class A |
| Measurement | One week per installation. Three TDD values are compared with the IEEE limit: 99th percentile 3-second, 99th percentile 10-minute and 95th percentile 10-minute. The highest counts for the penalty. |
| New connections | Self-declaration that adequate harmonic filters will be installed. Measurement after 12 months. |
The timeline from measurement to disconnection
After a failed measurement you get a notice and six months to install adequate harmonic filters. If you stay non-compliant, a penalty runs for the next 12 months. It stops once filters are installed and the Licensee confirms compliance.
| Excess TDD over the limit | Penalty, % of monthly current consumption charges |
|---|---|
| Up to 3% | 1% |
| Above 3% up to 6% | 2% |
| Above 6% up to 9% | 3% |
| Above 9% up to 12% | 4% |
| Above 12% up to 15% | 5% |
| Above 15% up to 18% | 6% |
| Above 18% up to 21% | 7% |
| Above 21% up to 24% | 8% |
| Above 24% up to 27% | 9% |
| Above 27% | 10% (capped) |
After the 12 months, a plant that still has no filters or still exceeds the limits gets a 30-day disconnection notice, reported to the Commission. If you install filters in that period, the Licensee tests them first, and supply is not disconnected if the values are within limits.
Which loads create harmonics in a plant
Variable frequency drives, servo drives, rectifiers, UPS systems and chargers draw non-linear current, and that raises the current distortion at the point of supply. A plant with many drives sees it most. This is where our drives and power electronics work applies, because we repair and handle these loads every day.
How we help you prepare
We guide and specify. We do not own or supply a Class A analyser, and we do not supply the filter. We help you read the result and choose the right fix.
- Collect the factsSingle-line diagram, transformer and load list, drive and rectifier count.
- Read the measurementThe Licensee report or your own power quality log: TDD against the IEEE 519-2014 limit.
- Find the sourceWhich drives, rectifiers, UPS or chargers cause the distortion.
- Shape the filter approachPassive, active or drive-level options, matched to the load.
- Review the filter offerWe check the filter vendor offer against the problem. The vendor supplies the filter.
- Re-check after fittingConfirm the TDD result before the Licensee tests again.
Who should contact us
- HT plants in Tamil Nadu at 11 kV, 22 kV, 33 kV and above with many drives or rectifiers.
- EV charging station operators.
- Plants that received a Licensee notice or want to prepare before the measurement.
Star is an independent company. Send the single-line diagram and the load list on the quote form or WhatsApp, and we reply with how we can help.
Frequently asked questions
Which consumers does the TNERC harmonic rule cover?
Bulk consumers at 33 kV and above, consumers and prosumers at 11 kV and 22 kV, and charging stations. HT tariff IV (Lift Irrigation) is excluded.
What standard and meter are used?
The limits follow IEEE Std. 519-2014. The Licensee uses a portable power quality meter that complies with IEC 61000-4-30 edition 3.0, Class A.
How long is the measurement?
One week per installation. The highest of three TDD values (99th percentile 3-second, 99th percentile 10-minute, 95th percentile 10-minute) is used for the penalty.
What happens if my plant fails the measurement?
You get a notice to install adequate harmonic filters within six months. If you remain non-compliant, penalties apply for the next 12 months, and after that a 30-day disconnection notice can follow.
How is the penalty calculated?
It is a percentage of the monthly current consumption charges, from 1% to a cap of 10%, rising with the excess TDD over the IEEE limit.
Does Star Automations sell harmonic filters or measure harmonics?
No. Star works as a consultant. We help you read the measurement, find the loads that cause the distortion, specify the filter approach and review the filter vendor offer. The Licensee measures and a filter vendor supplies the filter.