Since 2000 · 3,000+ customers

Home / DCS and control card repair / GE Mark VI and Mark VIe

Turbine control repair

GE Mark VI and Mark VIe Speedtronic turbine control board repair in India

Star Automations repairs GE Mark VI and Mark VIe Speedtronic turbine control boards and I/O packs for gas and steam turbines at the component level, from Puducherry, Chennai and Bengaluru. Power plants, refineries and petrochemical units send boards such as IS200 terminal boards, IS220 I/O packs and UCVE or UCSC controllers. We diagnose, repair and bench test the board, and the plant commissions it back into its own control system.

Send your part number for a quote

Send the part number, a photo of the nameplate and the fault on WhatsApp or the quote form. We reply with how we can help and a quote.

GE Mark VI and Mark VIe part numbers we repair

These are examples of part numbers we handle. If yours is not listed, send it anyway.

Part number or modelFamilyWhat usually brings it to usService
IS200VRTDH1DABGE Speedtronic Mark VI or Mark VIe boardI/O or communication fault, failed channel, power-up failureRepair, tested replacement or exchange
IS220PDIIH1BGE Speedtronic Mark VI or Mark VIe boardI/O or communication fault, failed channel, power-up failureRepair, tested replacement or exchange
IS220PSVOH1AGE Speedtronic Mark VI or Mark VIe boardI/O or communication fault, failed channel, power-up failureRepair, tested replacement or exchange
IS215UCVEH2AGE Speedtronic Mark VI or Mark VIe boardI/O or communication fault, failed channel, power-up failureRepair, tested replacement or exchange
IS420UCSCH2AGE Speedtronic Mark VI or Mark VIe boardI/O or communication fault, failed channel, power-up failureRepair, tested replacement or exchange
IS220PCLAH1AGE Speedtronic Mark VI or Mark VIe boardI/O or communication fault, failed channel, power-up failureRepair, tested replacement or exchange

The plant keeps control of configuration and commissioning. We return a repaired and bench-tested board.

Common symptoms and what to check

SymptomWhat to check first
I/O pack shows offlineCheck the network cable and the pack power, then send the pack for bench test
Communication loss on the controller networkCheck connectors and switch ports, then the board that talks on the network
Diagnostic alarm after power cycleNote the alarm text and the pack or board it names, and send us the board
Input channel reads wrong or driftsCheck field wiring and the terminal board, then send the board for signature analysis
Board does not power upCheck supply voltage first, then send the board

Send the fault description and photos on WhatsApp and we tell you what we see.

How we repair and test your board

  1. Receive and logPart number, nameplate and the fault are recorded.
  2. Visual inspectionBurnt parts, damaged tracks and connectors are checked.
  3. Signature analysisThe board is analysed on a QMax QT-205 to find the failed components.
  4. Component-level repairFailed parts are replaced and the board is cleaned.
  5. Bench testThe repaired board is bench tested before it leaves us.
  6. DispatchThe board is packed and sent back to your plant.

Repair, tested replacement or exchange

Three ways to restore a failed control boardRepair your own board, take a tested replacement where available, or exchange your board for a tested unit.Repairyour own board is fixedand bench testedTested replacementa tested unit whereavailableExchangesend yours, receive atested unit
OptionWhen it fitsWhat you send
RepairYou want your own board back, repairedThe faulty board
Tested replacementThe plant cannot wait for a repair, and a unit is availablePart number and nameplate photo
ExchangeYou want a tested unit now and will send yoursYour board, sent in exchange

Where we work from

We work from Puducherry, Chennai and Bengaluru, with offices in Hyderabad and Delhi. Boards come to us from across India and from abroad. See international repair and return. Related: DCS and control card repair, Bently Nevada 3500 repair.

Frequently asked questions

Do you repair GE Mark VI and Mark VIe boards?

Yes. We repair GE Mark VI and Mark VIe Speedtronic terminal boards, I/O packs and controller boards at the component level.

What should I send for a repair quote?

Send the part number, a photo of the nameplate and a short description of the fault on WhatsApp +91 97866 22233 or through the quote form. We reply with how we can help and a quote.

Can you repair a board the OEM no longer supports?

Yes, in most cases. We repair at the component level, so the work does not depend on OEM support. Where a part cannot be sourced we tell you before we proceed.

How do you test a board before it goes back?

We inspect it, analyse its signature on a QMax QT-205, repair the failed components and bench test it before dispatch.

Should I choose repair, a tested replacement or an exchange?

Repair keeps your own board. A tested replacement or exchange suits a plant that cannot wait. Send the part number and we tell you what is possible.

Do I need to reload configuration after the repair?

The plant keeps its own configuration and commissioning. We return a repaired and bench-tested board, and your engineers load and verify it on your system.

Does the repair carry a warranty?

Every repair carries a warranty; terms are on the quote.

Is Star Automations an OEM service partner?

No. Star Automations is an independent repair company, not an OEM service partner.

Can you take boards from outside India?

Yes. We receive boards from across India and from abroad. See our international repair and return page for the steps.

How much does a repair cost?

The cost depends on the board and the fault. Send the part number and a photo of the nameplate, and we reply with a quote.