Danfoss · Drives
FC-302P5K5T5E20H1 — Danfoss VLT AutomationDrive FC 302 (5.5 kW): fault codes, repair & supply
The FC-302P5K5T5E20H1 is a Danfoss VLT AutomationDrive FC 302, 5.5 kW, 380–500 V. Star Automations sources and supplies the FC-302P5K5T5E20H1 and repairs failed units at component level, so you can choose between a replacement and getting your existing unit restored. This is a current OEM line. Availability and price are confirmed per enquiry. Most quotes come back the same day — send the part number or the fault code on WhatsApp.
Common Danfoss VLT FC 302 fault codes and what we usually find
Fault code wording can differ by firmware and manual revision — always confirm against the manual for your exact unit. The causes below are typical findings, not a diagnosis of your specific unit.
| Code | Meaning | Typical cause |
|---|---|---|
| 13 | Overcurrent | Output stage fault, motor or cable short |
| 14 | Earth fault | Motor or cable insulation fault |
| 16 | Short circuit | Failed IGBT or shorted motor |
| 7 | DC overvoltage | Fast decel, brake fault, aged capacitors |
| 8 | DC undervoltage | Supply dip or rectifier fault |
| 29 | Heatsink temperature | Blocked airflow or failed fan |
| 30 | Motor phase U missing | Open motor phase or output stage fault |
When a FC-302P5K5T5E20H1 needs attention
- Alarm number on the display at start
- Drive will not power up
- Overheat or fan failure
- Earth fault with a good motor
- Trips under load
Replace or repair your FC-302P5K5T5E20H1
Source a replacement
Send the part number. We check sourcing from global surplus and the OEM channel and reply the same day with availability, condition and price. Advance or verified escrow applies.
Repair your existing unit
If sourcing takes longer or you want to keep your configuration, we repair at component level — power stage, gate-drive, control and supply sections — and test before dispatch.
What people look up for the FC-302P5K5T5E20H1
- Danfoss FC302 alarm 13 overcurrent
- Danfoss FC302 alarm 14 earth fault
- FC-302P5K5T5E20H1 repair
- Danfoss VLT repair India
- Danfoss FC302 alarm 29 heatsink
FC-302P5K5T5E20H1 — common questions
Can you supply the FC-302P5K5T5E20H1 in India?
Can a faulty FC-302P5K5T5E20H1 be repaired instead of replaced?
My FC-302P5K5T5E20H1 shows 13 (overcurrent). What should I do?
Is the exact part number important?
Need the FC-302P5K5T5E20H1 now?
Send the part number or fault code — we reply the same day. Serving Chennai, Puducherry, Bengaluru, Hyderabad, Delhi and pan-India.