Bengaluru · Electronic load testing
Solar Inverter and UPS Load Testing in Bengaluru
Star Automations load-tests the DC side of UPS units, inverters and solar power electronics in Bengaluru: battery, charger and DC-DC stages within the rating of our electronic load. Each unit gets a test record.
Important: This is an in-house electrical test and test record service for pre-compliance, production, validation and post-repair testing. It is not NABL-accredited testing, and it is not BIS or CE certification. Our records do not replace a certified laboratory's report. For accredited certification, please use a NABL- or BIS-recognised laboratory.
What can be tested with a DC electronic load
A DC electronic load can sink power from battery chargers, DC-DC stages and DC supplies inside UPS units, inverters and solar equipment. We set the load mode and values, record the measured voltage, current and power, and report pass or fail against your limits.
In scope and out of scope
| In scope | Out of scope |
|---|---|
| DC-side checks: battery, charger and DC-DC stages, within our load's rating | Generator or large UPS commissioning |
| Field-return and service checks on boards and modules | Grid-tie compliance testing |
| Output-side tests on request, where our equipment allows; we confirm feasibility for each unit | Testing that needs equipment we do not have; we tell you before work starts |
Field-return and service checks
For service teams, a load record after repair shows what the unit delivered at set conditions. See our drive repair and industrial electronics repair services.
How it works
Send the details
Product type, quantity, rated voltage, current and power, and your limits. Ship samples to us or book an on-site visit in Bengaluru.
Agree the test plan
We confirm in writing the load mode, set values, duration and connections, and tell you if your product is outside our load's range.
Test
Trained staff run each unit in a supervised area and log it individually.
Receive the record
You get set conditions, measured values and a pass or fail result for each unit.
What you receive
A test record (PDF) that lists, for each unit: the unit ID, the load mode and set values, the duration, the measured voltage, current and power, a pass or fail result against your limits, and the instrument model used, test date and operator name. Logged data and photos can be added on request.
Frequently asked questions
Can you test UPS units and solar inverters?
We can test the DC side, such as battery, charger and DC-DC stages, within our load's rating. Output-side tests on a complete UPS or inverter need an AC load or source, so we confirm feasibility for each unit before agreeing a test plan. We do not do generator or large UPS commissioning.
Can you test an inverter board after repair?
Yes, the DC-side stages within our load's rating, at set conditions, with a record for each unit. It is a bench check, not a type test and not grid-compliance testing. Send the board details so we can confirm feasibility.
Do you test solar panels or MPPT?
Only on request and only if our equipment supports it for your unit. We confirm feasibility before agreeing a test plan, and we tell you before any work starts if the job is outside our range.
Get a test plan
Tell us what you need to test: product, quantity, rated voltage, current and power, and your limits or specification.
WhatsApp: +91 97866 22233. Website: www.starautomations.com. Address: 1st Floor, 40, Goshala Rd, Garudachar Palya, Mahadevapura, Bengaluru, Karnataka 560048.
Message received
Our team replies by email or WhatsApp. For urgent requests, WhatsApp +91 97866 22233.
Star Automations provides in-house testing and test records. We are not a NABL-accredited or BIS-recognised laboratory. Star Automations is an independent multi-brand repair company and is not an OEM service centre.