HMI touch screens, industrial PCs and industrial displays
HMI Touch Screen, Display, Backlight, Industrial PC and Rugged PC: What They Are and Where to Get Them
Star Automations, an independent repair company in Puducherry, Chennai and Bengaluru, repairs and supports parts for HMI operator panels, industrial PCs and industrial displays. An HMI panel combines a touch screen, an LCD display, a backlight and a controller board. When one of them fails, it can often be repaired or replaced on its own. Send the part number for a quote.
What is inside an HMI operator panel
- Touch screen (digitizer) The layer that senses where the operator touches. Resistive and capacitive types are common.
- Display (LCD panel) The glass panel that shows the screen. Size and resolution vary by model.
- Backlight and driver The light behind the LCD, and the board that powers it. A dark screen on a powered panel often points here.
- Controller board The processor, memory and communication ports (Ethernet, serial, USB, fieldbus). It sends the picture to the display.
- Front overlay, bezel and cabinet Protects the unit from dust and moisture and holds it in the panel cutout.
- Battery Keeps the clock and basic settings while the unit is off.
Which part can be supplied or repaired on its own depends on the model. Send the part number and we confirm.
Industrial PC, rugged PC and panel PC
- Industrial PC (IPC) A computer built for plant use: long-term supply, expansion slots, high reliability, often fanless with solid-state storage.
- Rugged PC Built to resist shock, vibration, temperature extremes, dust and liquids. Levels run from semi-rugged to fully rugged to ultra-rugged.
- The difference Industrial describes where it is used, rugged describes how it is built. Most industrial PCs are built to rugged standards.
- Panel PC Display, touch screen and computer in one unit for a machine panel.
- Inside an IPC Motherboard or CPU board, power supply, storage, expansion cards, cooling, and the display and touch layer in a panel PC.
See our industrial PC repair example.
Industrial displays and the brands you will meet
- Industrial display A monitor or panel built for harsh environments, with panel-mount or VESA mounting and a wide temperature range.
- Brands we repair We repair HMI operator panels and industrial PCs from Siemens SIMATIC, Rockwell Automation (PanelView), Beckhoff, Pro-face, Advantech, Kontron and Phoenix Contact, and other makes. Send the model or part number.
- Siemens SIMATIC HMI families Basic Panels, Key Panels, Comfort Panels, Mobile Panels, Unified Panels and PC-based HMI, as listed by Siemens.
Siemens pages on this site: Siemens HMI repair, MP 277 and TP 270.
Siemens SIMATIC HMI and panel PC models
Model names below are as listed in Siemens HMI and IPC documentation. Send the exact order number and we confirm repair or parts.
- Basic Panels KTP400, KTP700, KTP900 and KTP1200 Basic (PN, and DP on 7-inch and 12-inch), plus the older KP300 and KP400 Basic.
- Comfort Panels TP700, TP900, TP1200, TP1500, TP1900 and TP2200 touch panels; KP400, KP700, KP900, KP1200 and KP1500 key panels; KTP400 Comfort.
- Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F.
- Key Panels KP8, KP8F and KP32F.
- Older panels MP 277 10-inch and TP 270, covered on their own pages.
- Panel PCs SIMATIC IPC277E, IPC377E, IPC477E and IPC677E, and Industrial Flat Panels (IFP1900, IFP2200 PRO).
- Box PCs SIMATIC IPC127E, IPC227E, IPC327E, IPC427E and IPC627E.
Samsung and Toshiba display panels
Samsung and Toshiba (Toshiba Matsushita Display) are LCD panel makers, not HMI brands. Their LTM series panels have been fitted inside industrial operator panels and monitors. Examples seen in parts listings include LTM150XS-T01, LTM15C458S, LTM08C342F, LTM170EU-L31 and LTM201M1-L01.
- How to identify the panel Read the label on the panel or on the HMI, and send it with a photo.
- What must match Size, resolution, connector and backlight type must match before a replacement is used.
How it works
- 1. Send the part number Model, part number or a photo of the label, on WhatsApp or the quote form.
- 2. Log and trace We identify the fault and say whether repair or replacement fits.
- 3. Repair or replace Component-level repair, or a replacement touch screen, display or backlight.
- 4. Bench test If it does not pass the bench test, it does not go back. Every repair carries a warranty; terms are on the quote.
Frequently asked questions
What is an HMI touch screen and what parts are inside it?
An HMI (human machine interface) panel is the operator screen on a machine. It combines a touch screen (the digitizer layer that senses touch), an LCD display, a backlight with its driver board, a controller board with the processor and communication ports, and a front overlay or cabinet. Which part can be repaired or replaced on its own depends on the model. Send the part number and we confirm.
The display works but touch does not respond. Is the touch screen or the controller at fault?
A clear picture with no touch response often points to the touch screen or its ribbon connection, but the controller board can also be the cause. The panel is tested on the bench before repair or replacement is recommended.
The screen is dark but the panel seems to be powered. Is it the backlight?
A dark or very dim screen while the unit is powered often points to the backlight or its driver board. A bench test separates a backlight fault from a display or controller fault.
What is an industrial PC (IPC)?
An industrial PC is a computer built for factory and plant use. It typically offers long-term supply, expansion slots and high reliability, and is often fanless with solid-state storage. Common uses are machine automation, SCADA and robotics.
What is the difference between an industrial PC and a rugged PC?
Industrial describes where the computer is used, rugged describes how it is built. A rugged PC resists shock, vibration, temperature extremes, dust and liquids, in semi-rugged, fully rugged and ultra-rugged levels. Most industrial PCs are built to rugged standards.
What is a panel PC?
A panel PC puts the display, touch screen and computer in one unit that mounts in a machine panel or on an arm. It replaces a separate monitor and PC.
Are Samsung and Toshiba display panels used in HMIs?
Samsung and Toshiba (Toshiba Matsushita Display) are LCD panel makers, not HMI brands. Their LTM series panels have been fitted inside industrial operator panels and monitors. Read the panel label or send the HMI part number, and match size, resolution, connector and backlight type before replacing a panel.
How do I get a price for an HMI part or repair?
Send the HMI model or part number, and a photo of the label if you can, on WhatsApp or through the quote form. The quote is prepared against the exact unit.
Which Siemens HMI and panel PC models do you repair?
We repair Siemens SIMATIC HMI panels and panel PCs, including Basic Panels (KTP400, KTP700, KTP900 and KTP1200 Basic), Comfort Panels (TP700, TP900, TP1200, TP1500, TP1900 and TP2200, plus the KP and KTP400 versions), Mobile Panels (KTP400F, KTP700, KTP700F, KTP900 and KTP900F), Key Panels (KP8, KP8F and KP32F), older panels such as MP 277 and TP 270, and SIMATIC IPC277E, IPC377E, IPC477E and IPC677E panel PCs. Send the exact order number and we confirm what can be repaired or supplied.
Star Automations is an independent repair company and not an OEM service partner. Brand and model names belong to their owners. Locations: Puducherry, Chennai, Bengaluru, Hyderabad and Delhi.