Since 2000 · 3,000+ customers

Home / Servo motor repair / Danfoss

Servo motor repair

Danfoss VLT Integrated Servo (ISD) motor repair in India

Star Automations repairs the motor and feedback section of Danfoss VLT Integrated Servo Drive units, including ISD 510 and ISD 410, at its Puducherry factory. The lab checks insulation, rewinds stators, replaces bearings and seals, and verifies the feedback on a universal servo test system. Emergency repairs are same day. Star is independent, not an OEM service partner.

  • 25+years of servo repair, since 2000
  • 3,000+customers across India
  • 100+servo brands covered by our universal servo motor test equipment
  • 5sites: Puducherry, Chennai, Bengaluru, Hyderabad, Delhi
  • Same dayemergency repair option*

*Where the fault and parts allow. Every repaired unit returns with a printed test report.

Repair turnaround you can plan around

Send a photo of the nameplate first. We confirm whether the motor is repairable, and the quote, the same working day.

Emergency: same day

For a line-down motor, where the fault and parts allow. WhatsApp us before you send it so the bench is kept free.

Urgent: 3 working days

Repair, encoder alignment and test, counted from the day the motor reaches the bench and the quote is approved.

Standard: 7 working days

Full repair, encoder alignment, run test under load and a printed test report.

  • Free repairability check from a nameplate photo
  • Printed test report with every motor
  • Written warranty, terms stated on every quotation
  • Pickup can be arranged; parts that must be imported are quoted with their own timeline

Send your motor model for the price

Prices are not listed because every motor and fault is different. Send the nameplate, a photo and the fault description, and the price comes with the quote. Every repair carries a warranty; terms are on the quote.

Danfoss models and feedback

SeriesFeedbackTypical faults
ISD 510Single-turn and multi-turn absolute, resolverFeedback fault, bearing wear
ISD 410Single-turn and multi-turn absolute, resolverOverheating, seal leak
VLT Integrated ServoAbsolute feedbackWinding short, brake not releasing

Send the nameplate and we confirm the series and repairability before you ship. This page covers the motor and feedback; the drive electronics in an integrated unit are assessed separately.

What the lab does on every Danfoss motor

Check or repairWhat it covers
Insulation and stator testingSurge and hipot testing of the stator winding
Vacuum-pressure rewindingFailed stators are rewound
Bearings and sealsBearings replaced, IP65 oil seals restored
Rotor balancingRotor is balanced after repair
Holding-brake torque testBrake release and holding torque are tested
Encoder or resolver alignmentFeedback is aligned on India's first universal servo motor test system
Signature analysis (QMax QT-205)Used on feedback and interface boards

Turnaround options and routes

OptionTurnaround
EmergencySame day
Urgent3 days
Standard7 days
RouteWhat it means
RepairYour own motor is repaired and returned.
Tested replacementA tested motor is supplied where one is available.
ExchangeYour faulty motor is swapped against a tested one, subject to availability.

Every repair carries a warranty; terms are on the quote. Star is independent, not an OEM service partner. Sauer Danfoss motors are covered on their own page.

How the repair works

Servo motor repair routeFour stages: receive, test, repair and align, return.ReceiveTestRepair and alignReturn
  1. Receive and logThe motor is logged with photos and the reported fault.
  2. TestInsulation, surge/hipot and feedback are tested.
  3. RepairWinding, bearings, seals and brake are repaired.
  4. Balance and alignThe rotor is balanced and the feedback aligned.
  5. Final testBrake torque and bench test before dispatch.
→How it works

From nameplate photo to a tested motor in 7 steps

One route for servo motors, encoders and drives. You see the price before any work starts, and the report before the unit leaves our bench.

  1. 1 · Nameplate photoSend it on WhatsApp or the form
  2. 2 · Repairable? QuoteUsually the same working day
  3. 3 · Courier or pickupThe unit reaches our bench
  4. 4 · Bench diagnosisInsulation, windings, brake, encoder
  5. 5 · RepairFailed parts, bearings, seals, brake
  6. 6 · Align and run-testEncoder aligned; no-load and load run
  7. 7 · Report and dispatchPrinted test report with the unit
  8. Line down?Servo Swap ships a tested unit first. How Servo Swap works

EmergencySame day*

Urgent3 working days

Standard7 working days

*Where the fault and parts allow. Turnaround counts from when the unit reaches our bench and the quote is approved.

Frequently asked questions

Do you repair the drive electronics in an ISD unit?

This page covers the motor and feedback section. The drive electronics of an integrated unit are assessed separately; send the nameplate and the fault description.

What does the lab check on a Danfoss ISD motor?

The lab tests insulation with surge and hipot, rewinds failed stators, replaces bearings, restores IP65 oil seals and verifies the feedback before dispatch.

Do you repair discontinued Danfoss ISD motors?

Yes. The motor is repaired at component level, so a discontinued model is repaired instead of replaced where possible.

What does the lab check on a Danfoss motor?

The lab tests insulation with surge and hipot, rewinds failed stators, replaces bearings, restores IP65 oil seals, balances the rotor, tests the holding brake and aligns the feedback before dispatch.

What are the turnaround options?

Emergency repairs are same day, urgent repairs 3 days and standard repairs 7 days.

What about the price?

Prices are not listed because each motor is different. Send the nameplate, a photo and the fault description, and the price comes with the quote.

Is the repair under warranty?

Every repair carries a warranty; terms are on the quote.

Is Star an OEM service partner for Danfoss?

No. Star Automations is an independent repairer, not an OEM service partner.

What should I send for a quote?

Send the nameplate photo, a photo of the motor and cable end, and the fault description by WhatsApp or email.

Do you also repair the matching drive?

Star Automations repairs many servo drives as well. Send the drive label with the motor nameplate.