Since 2000 · 3,000+ customers

Home / DCS and control card repair / Woodward 505 and MicroNet

Turbine governor repair

Woodward 505, MicroNet and Peak 150 turbine governor repair in India

Star Automations repairs Woodward 505, 505E, MicroNet Plus and Peak 150 turbine speed controllers and actuator driver modules at the component level for steam and gas turbines in Indian plants. We diagnose, repair and bench test the unit. The plant re-validates overspeed protection on its own system.

Send your part number for a quote

Send the part number, a photo of the nameplate and the fault on WhatsApp or the quote form. We reply with how we can help and a quote.

Woodward controllers and modules we repair

These are examples of models and part numbers we handle. If yours is not listed, send it anyway.

Part number or modelFamilyWhat usually brings it to usService
505Woodward turbine control productSpeed input or actuator driver fault, display or power failureRepair, tested replacement or exchange
505EWoodward turbine control productSpeed input or actuator driver fault, display or power failureRepair, tested replacement or exchange
MicroNet PlusWoodward turbine control productSpeed input or actuator driver fault, display or power failureRepair, tested replacement or exchange
Peak 150Woodward turbine control productSpeed input or actuator driver fault, display or power failureRepair, tested replacement or exchange
ProActWoodward turbine control productSpeed input or actuator driver fault, display or power failureRepair, tested replacement or exchange
9907-164Woodward turbine control productSpeed input or actuator driver fault, display or power failureRepair, tested replacement or exchange
5464-414Woodward turbine control productSpeed input or actuator driver fault, display or power failureRepair, tested replacement or exchange

This is hardware repair and bench test. The plant re-validates overspeed protection.

Common symptoms and what to check

SymptomWhat to check first
Speed sensor input errorCheck the sensor, gap and cable, then send the unit
Actuator driver faultCheck actuator wiring and supply, then send the module
Display or keypad not workingSend the unit for display and keypad repair
Controller does not power upCheck supply voltage, then send the unit
Output drifts or huntsNote the conditions, then send the unit for bench test

Send the fault description and photos on WhatsApp and we tell you what we see.

How we repair and test your board

  1. Receive and logPart number, nameplate and the fault are recorded.
  2. Visual inspectionBurnt parts, damaged tracks and connectors are checked.
  3. Signature analysisThe board is analysed on a QMax QT-205 to find the failed components.
  4. Component-level repairFailed parts are replaced and the board is cleaned.
  5. Bench testThe repaired board is bench tested before it leaves us.
  6. DispatchThe board is packed and sent back to your plant.

Repair, tested replacement or exchange

Three ways to restore a failed control boardRepair your own board, take a tested replacement where available, or exchange your board for a tested unit.Repairyour own board is fixedand bench testedTested replacementa tested unit whereavailableExchangesend yours, receive atested unit
OptionWhen it fitsWhat you send
RepairYou want your own board back, repairedThe faulty board
Tested replacementThe plant cannot wait for a repair, and a unit is availablePart number and nameplate photo
ExchangeYou want a tested unit now and will send yoursYour board, sent in exchange

Where we work from

We work from Puducherry, Chennai and Bengaluru, with offices in Hyderabad and Delhi. Boards come to us from across India and from abroad. See international repair and return. Related: DCS and control card repair, genset controller repair.

Frequently asked questions

Do you repair Woodward 505 and MicroNet controllers?

Yes. We repair Woodward 505, 505E, MicroNet Plus and Peak 150 controllers and related modules at the component level.

What should I send for a repair quote?

Send the part number, a photo of the nameplate and a short description of the fault on WhatsApp +91 97866 22233 or through the quote form. We reply with how we can help and a quote.

Can you repair a board the OEM no longer supports?

Yes, in most cases. We repair at the component level, so the work does not depend on OEM support. Where a part cannot be sourced we tell you before we proceed.

How do you test a board before it goes back?

We inspect it, analyse its signature on a QMax QT-205, repair the failed components and bench test it before dispatch.

Should I choose repair, a tested replacement or an exchange?

Repair keeps your own board. A tested replacement or exchange suits a plant that cannot wait. Send the part number and we tell you what is possible.

Does the plant re-validate overspeed protection?

Yes. We repair the hardware and bench test the unit. The plant re-validates overspeed protection on its own system.

Does the repair carry a warranty?

Every repair carries a warranty; terms are on the quote.

Is Star Automations an OEM service partner?

No. Star Automations is an independent repair company, not an OEM service partner.

Can you take boards from outside India?

Yes. We receive boards from across India and from abroad. See our international repair and return page for the steps.

How much does a repair cost?

The cost depends on the board and the fault. Send the part number and a photo of the nameplate, and we reply with a quote.