Turbine control repair
GE Mark VI and Mark VIe Speedtronic turbine control board repair in India
Star Automations repairs GE Mark VI and Mark VIe Speedtronic turbine control boards and I/O packs for gas and steam turbines at the component level, from Puducherry, Chennai and Bengaluru. Power plants, refineries and petrochemical units send boards such as IS200 terminal boards, IS220 I/O packs and UCVE or UCSC controllers. We diagnose, repair and bench test the board, and the plant commissions it back into its own control system.
Send your part number for a quote
Send the part number, a photo of the nameplate and the fault on WhatsApp or the quote form. We reply with how we can help and a quote.
GE Mark VI and Mark VIe part numbers we repair
These are examples of part numbers we handle. If yours is not listed, send it anyway.
| Part number or model | Family | What usually brings it to us | Service |
|---|---|---|---|
| IS200VRTDH1DAB | GE Speedtronic Mark VI or Mark VIe board | I/O or communication fault, failed channel, power-up failure | Repair, tested replacement or exchange |
| IS220PDIIH1B | GE Speedtronic Mark VI or Mark VIe board | I/O or communication fault, failed channel, power-up failure | Repair, tested replacement or exchange |
| IS220PSVOH1A | GE Speedtronic Mark VI or Mark VIe board | I/O or communication fault, failed channel, power-up failure | Repair, tested replacement or exchange |
| IS215UCVEH2A | GE Speedtronic Mark VI or Mark VIe board | I/O or communication fault, failed channel, power-up failure | Repair, tested replacement or exchange |
| IS420UCSCH2A | GE Speedtronic Mark VI or Mark VIe board | I/O or communication fault, failed channel, power-up failure | Repair, tested replacement or exchange |
| IS220PCLAH1A | GE Speedtronic Mark VI or Mark VIe board | I/O or communication fault, failed channel, power-up failure | Repair, tested replacement or exchange |
The plant keeps control of configuration and commissioning. We return a repaired and bench-tested board.
Common symptoms and what to check
| Symptom | What to check first |
|---|---|
| I/O pack shows offline | Check the network cable and the pack power, then send the pack for bench test |
| Communication loss on the controller network | Check connectors and switch ports, then the board that talks on the network |
| Diagnostic alarm after power cycle | Note the alarm text and the pack or board it names, and send us the board |
| Input channel reads wrong or drifts | Check field wiring and the terminal board, then send the board for signature analysis |
| Board does not power up | Check supply voltage first, then send the board |
Send the fault description and photos on WhatsApp and we tell you what we see.
How we repair and test your board
- Receive and logPart number, nameplate and the fault are recorded.
- Visual inspectionBurnt parts, damaged tracks and connectors are checked.
- Signature analysisThe board is analysed on a QMax QT-205 to find the failed components.
- Component-level repairFailed parts are replaced and the board is cleaned.
- Bench testThe repaired board is bench tested before it leaves us.
- DispatchThe board is packed and sent back to your plant.
Repair, tested replacement or exchange
| Option | When it fits | What you send |
|---|---|---|
| Repair | You want your own board back, repaired | The faulty board |
| Tested replacement | The plant cannot wait for a repair, and a unit is available | Part number and nameplate photo |
| Exchange | You want a tested unit now and will send yours | Your board, sent in exchange |
Where we work from
We work from Puducherry, Chennai and Bengaluru, with offices in Hyderabad and Delhi. Boards come to us from across India and from abroad. See international repair and return. Related: DCS and control card repair, Bently Nevada 3500 repair.
Frequently asked questions
Do you repair GE Mark VI and Mark VIe boards?
Yes. We repair GE Mark VI and Mark VIe Speedtronic terminal boards, I/O packs and controller boards at the component level.
What should I send for a repair quote?
Send the part number, a photo of the nameplate and a short description of the fault on WhatsApp +91 97866 22233 or through the quote form. We reply with how we can help and a quote.
Can you repair a board the OEM no longer supports?
Yes, in most cases. We repair at the component level, so the work does not depend on OEM support. Where a part cannot be sourced we tell you before we proceed.
How do you test a board before it goes back?
We inspect it, analyse its signature on a QMax QT-205, repair the failed components and bench test it before dispatch.
Should I choose repair, a tested replacement or an exchange?
Repair keeps your own board. A tested replacement or exchange suits a plant that cannot wait. Send the part number and we tell you what is possible.
Do I need to reload configuration after the repair?
The plant keeps its own configuration and commissioning. We return a repaired and bench-tested board, and your engineers load and verify it on your system.
Does the repair carry a warranty?
Every repair carries a warranty; terms are on the quote.
Is Star Automations an OEM service partner?
No. Star Automations is an independent repair company, not an OEM service partner.
Can you take boards from outside India?
Yes. We receive boards from across India and from abroad. See our international repair and return page for the steps.
How much does a repair cost?
The cost depends on the board and the fault. Send the part number and a photo of the nameplate, and we reply with a quote.