Test stations and jigs
End-of-line test stations for motors and drives, built to your product
Star Automations is an independent industrial electronics and drives engineering company in Puducherry, with sites in Chennai, Bengaluru, Hyderabad and Delhi. We build end-of-line test stations and jigs for motor and drive products. A station runs the electrical checks your product needs, such as insulation, hipot, winding resistance, back-EMF, no-load current and speed, Hall or encoder feedback, and communication. We design each station around your product after a design study.
What a station can check
We pick the set of checks that fits your product. The limits come from your product specification.
| Check | What it tells you | Applies to |
|---|---|---|
| Insulation | Isolation between winding and frame | Motors, drives |
| Hipot | Dielectric withstand of the insulation system | Motors, drives |
| Winding resistance | Phase balance and winding faults | Motors |
| Back-EMF | Magnet and winding correctness | PM and BLDC motors |
| No-load current and speed | Basic running health of the unit | Motors |
| Hall or encoder feedback | Feedback signals and alignment | Motors with feedback |
| Communication | The unit talks on its protocol | Drives, encoders |
How we build a station
Every station starts with a design study, so the fixture and the test sequence match your product.
- Design studyWe study your product, the faults you want to catch and the test points.
- Fixture and wiring designJig, connectors and instruments chosen for your product.
- Test sequence agreedChecks, order and pass or fail limits agreed with you.
- BuildStation built and wired at our Puducherry factory.
- Trial on your unitsWe run your sample units and adjust the sequence.
- HandoverOperator guidance and support after handover.
Why a repair company builds test stations
We test servo motors, drives and feedback devices on the bench every day. We use a universal servo motor test system, a Unidrive M701 drive bench and instrument-grade feedback testers. That daily fault-finding shows us which checks catch real faults, and we build the same thinking into your station.
Who should contact us
- Motor and drive manufacturers who need an end-of-line check.
- Rewinders and refurbishers who want a repeatable test after repair.
- Assemblers and pilot production lines that test units by hand today.
Star is an independent company. Describe your product and the faults you want to catch on the quote form or WhatsApp, and we reply with how we can help.
Frequently asked questions
What tests can an end-of-line station run?
Insulation, hipot, winding resistance, back-EMF, no-load current and speed, Hall or encoder feedback and communication checks. We choose the set that fits your product.
Can you build a station for my own motor or drive product?
Yes. We design the station around your product after a design study, and we agree the test sequence and limits with you.
Do you test motors with Hall sensors or encoders?
Yes. The station checks the feedback signals and their alignment with the motor.
Can the station check communication?
Yes. For drives and encoders the station checks that the unit communicates on its protocol.
Do you start with a design study?
Yes. We study your product, the faults you want to catch and the test points before we design the fixture.
Does Star Automations also repair motors and drives?
Yes. Repair and bench testing of servo motors, drives and feedback devices is our core work, and that experience goes into our test stations.