Bengaluru · Wireless RF testing and job work
Production Overflow and NPI RF Testing in Bengaluru
Extra RF test capacity for module makers, EMS teams and NPI programmesWhen your own test station is busy, down or not yet built, we run your Wi-Fi and Bluetooth RF test on our IQxel-M under your written plan, with a record per unit. Lot sizes and schedule are agreed in writing.
Important: This is an in-house RF verification and test record service for design checks, production, validation, returned-unit analysis and post-repair testing. It is not NABL-accredited testing, and it is not WPC, BIS, FCC, CE or any other regulatory certification. Our records do not replace an accredited laboratory's report. For type approval or certification, please use an accredited or notified laboratory.
When overflow testing helps
- Peak lots
- A test station that is down
- Line balancing
NPI and pilot runs
We test first-article and pilot batches while your own line is being set up, and share the records so you can check the setup and limits.
From golden sample to volume run
Step 1
We sign your NDA if you need one.
Step 2
You send a golden unit, samples and the test firmware or vendor tool.
Step 3
We agree the test plan and limits in writing.
Step 4
We test a pilot batch and share the records.
Step 5
We run the full lots under the agreed plan.
Step 6
You receive the per-unit and per-lot records.
Fixtures, scripts and what we need from you
What you supply: the devices or boards, test firmware or a vendor test tool that puts the radio into transmit and receive test modes, a golden sample, RF connector or fixture access, and your test plan with limits. Without a test mode we cannot drive the radio.
For radio tuning and verification steps, we can run them where your chipset tool is available to us. We also run electronic load tests for production burn-in and load checks.
NDA and supplier onboarding
NDA-friendly: we sign your NDA before we receive samples or test plans. Company profile on request.
What you receive
A per-unit and per-lot test record (PDF with a CSV data file): unit ID, set conditions, measured values, your limits, pass or fail, instrument model, software version, date and operator name. We report what we measure.
Frequently asked questions
Do you take bulk orders and production overflow work?
Yes, for corporate customers. You send a golden sample and your test plan, we agree a pilot batch, then we run volume lots with a test record for every unit. We work to your limits and your test firmware. Lot sizes, schedule and conditions are agreed in writing for each lot, and we sign an NDA on request.
Can you run my device's radio tuning step as an outsourced job?
Where your chipset's test software and test mode are available to us, we can run your radio tuning and verification sequence as an outsourced production step. You supply the firmware or vendor test tool, the golden sample and the limits. Chipset support depends on the software installed on our unit and is confirmed before any run.
What do I need to supply for testing?
Please supply the devices or boards, a way to put each into transmit and receive test modes through firmware or a vendor test tool, a golden sample, an RF connector or fixture, and your test plan with limits. Without a test mode we cannot drive the radio. We can help define the fixture and the script on request.
Are your test records certificates (NABL, WPC, BIS, FCC or CE)?
No. We provide in-house RF verification and a test record. We are not a NABL-accredited laboratory, and our records are not WPC, BIS, FCC, CE or any other regulatory certification. For type approval or certification, please use an accredited or notified laboratory. Our records support your own pre-checks and production quality control.
Request a pilot batch quote
Tell us what you need to test: device type, technologies, quantity per lot and per month, and your limits or test plan. We reply on WhatsApp or by email to agree the next step.
WhatsApp: +91 97866 22233. Website: www.starautomations.com. Address: 1st Floor, 40, Goshala Rd, Garudachar Palya, Mahadevapura, Bengaluru, Karnataka 560048.
Message received
Our team replies by email or WhatsApp. For urgent requests, WhatsApp +91 97866 22233.
Star Automations provides in-house testing and test records. We are not a NABL-accredited laboratory, and our records are not regulatory certification. Star Automations is an independent multi-brand repair company and is not an OEM service centre.