Since 2000 · 3,000+ customers

Mitsubishi · PLC and HMI modules

FX3U-32MR/ES — MELSEC FX3U-32MR/ES micro PLC: fault codes, repair & supply

The FX3U-32MR/ES is a Mitsubishi MELSEC FX3U micro PLC base unit with relay outputs and AC supply. Star Automations sources and supplies the FX3U-32MR/ES and repairs failed units at component level, so you can choose between a replacement and getting your existing unit restored. This is a current OEM line. Availability and price are confirmed per enquiry. Most quotes come back the same day — send the part number or the fault code on WhatsApp.

Mitsubishi automation spares and drives at Star Automations
01Fault codes

Common MELSEC FX3U fault codes and what we usually find

Fault code wording can differ by firmware and manual revision — always confirm against the manual for your exact unit. The causes below are typical findings, not a diagnosis of your specific unit.

CodeMeaningTypical cause
ERROR flashingProgram or setting errorParameter, syntax or circuit error; check D8064 to D8066
ERROR onCPU errorHardware fault or watchdog error; check D8061
POWER offNo powerSupply or power circuit fault
BATT onBattery voltage lowReplace the battery
D8064Parameter errorWrong or corrupted parameters
D8065Syntax errorProgram syntax problem
D8066Circuit errorLadder circuit problem
D8067Operation errorInstruction operated outside allowed range
02Symptoms

When a FX3U-32MR/ES needs attention

  • ERROR LED flashing or lit
  • PLC will not go to RUN
  • Outputs not switching (relay failure)
  • Battery alarm
  • Communication with the programming tool fails
03Your options

Replace or repair your FX3U-32MR/ES

Source a replacement

Send the part number. We check sourcing from global surplus and the OEM channel and reply the same day with availability, condition and price. Advance or verified escrow applies.

Repair your existing unit

If sourcing takes longer or you want to keep your configuration, we repair at component level — power stage, gate-drive, control and supply sections — and test before dispatch.

04Related searches

What people look up for the FX3U-32MR/ES

  • FX3U-32MR/ES repair
  • FX3U-32MR/ES price India
  • FX3U error LED flashing
  • FX3U D8061 error
  • FX3U battery low
  • FX3U replacement FX5U
06FAQ

FX3U-32MR/ES — common questions

Can you supply the FX3U-32MR/ES in India?
Yes. Star Automations sources the FX3U-32MR/ES from global surplus and the OEM channel, and ships across India. Send the part number on WhatsApp +91 97866 22233 for same-day availability, condition and price.
Can a faulty FX3U-32MR/ES be repaired instead of replaced?
In many cases yes. We repair Mitsubishi units at component level and test before dispatch. Send the fault code or symptom and we will tell you whether repair is practical for your unit.
My FX3U-32MR/ES shows ERROR flashing (program or setting error). What should I do?
Check supply, wiring and cooling first, then send us the full fault message. Typical causes: parameter, syntax or circuit error; check d8064 to d8066. We can quote a repair or a replacement.
Is the exact part number important?
Yes. Revision and option suffixes matter for Mitsubishi parts. Send the full number from the nameplate, or a photo of it, and we will confirm a compatible match before you pay.

Need the FX3U-32MR/ES now?

Send the part number or fault code — we reply the same day. Serving Chennai, Puducherry, Bengaluru, Hyderabad, Delhi and pan-India.