ABB · Drives
ACS800-01-0025-3 — ACS800 legacy drive: fault codes, repair & supply
The ACS800-01-0025-3 is an ABB ACS800 AC drive, a legacy product still widely installed in Indian plants. Star Automations sources and supplies the ACS800-01-0025-3 and repairs failed units at component level, so you can choose between a replacement and getting your existing unit restored. This is a discontinued OEM line. We source it from global surplus, and advance payment secures your delivery slot. Most quotes come back the same day — send the part number or the fault code on WhatsApp.
Common ACS800 fault codes and what we usually find
Fault code wording can differ by firmware and manual revision — always confirm against the manual for your exact unit. The causes below are typical findings, not a diagnosis of your specific unit.
| Code | Meaning | Typical cause |
|---|---|---|
| OVERCURRENT (2310) | Overcurrent | Short circuit, motor or cable fault, too-short ramp |
| DC OVERVOLT (3210) | DC link overvoltage | Fast deceleration, regenerative load |
| DC UNDERVOLT (3220) | DC link undervoltage | Low or dropped supply |
| EARTH FAULT (2330) | Earth leakage | Motor or cable insulation failure |
| SHORT CIRC (2340) | Short circuit | Output short or failed IGBT |
| SUPPLY PHASE (3130) | Input phase loss | Missing phase, loose terminal |
| ACS 800 TEMP (4210) | Drive overtemperature | Blocked airflow, failed fan |
When a ACS800-01-0025-3 needs attention
- Trips on start or at speed
- Display blank or drive restarts
- Fan noise or overheating
- Burnt smell or blown fuses
- Fieldbus communication errors
Replace or repair your ACS800-01-0025-3
Source a replacement
Send the part number. We check sourcing from global surplus and the OEM channel and reply the same day with availability, condition and price. Advance or verified escrow applies.
Repair your existing unit
If sourcing takes longer or you want to keep your configuration, we repair at component level — power stage, gate-drive, control and supply sections — and test before dispatch.
What people look up for the ACS800-01-0025-3
- ACS800-01-0025-3 repair
- ACS800 repair India
- ABB ACS800 earth fault
- ABB ACS800 overcurrent
- ABB ACS800 DC overvoltage
- ACS800 replacement ACS880
ACS800-01-0025-3 — common questions
Can you supply the ACS800-01-0025-3 in India?
Can a faulty ACS800-01-0025-3 be repaired instead of replaced?
My ACS800-01-0025-3 shows OVERCURRENT (2310) (overcurrent). What should I do?
Is the exact part number important?
Need the ACS800-01-0025-3 now?
Send the part number or fault code — we reply the same day. Serving Chennai, Puducherry, Bengaluru, Hyderabad, Delhi and pan-India.